4.Feed the strip of fasteners into the magazine (“T” slot), until they are past the spring (A) Fig. 21.
5.Pull the follower (B) Fig. 22 all the way to the rear of the magazine and release. The follower will apply pressure to the strip of nails to feed it into the driving mechanism as shown in (B) Fig. 22A .
6.Adjust directional exhaust deflector (A) Fig. 23 so that the exhaust air blast or debris will be directed away from the operator. The exhaust deflector provides seven detented positions for directing the exhaust blast away from the operator. Grasp the deflector and rotate it to the desired position for the current application.
Fig. 18
A
B
C
Fig. 20
Fig. 22 | B |
|
AFig. 19
A
Fig. 21
B
Fig. 22A
| A |
Fig. 23 | |
| |
|
|
8
