ASSEMBLE SKYHOOK
Tools needed:
1 - 1/2” socket or open end wrench
1 - Torque wrench
Parts bag contains:
1 - Skyhook
2 - Upper brackets
4 - Bolts,
4 - Lockwashers, 5/16”
4 - Nuts, Whizlock 5/16”
1.Place skyhook under frame as shown.
2.With skyhook resting on fuel tank install upper bracket as shown.
3.Wrap upper bracket around frame.
4.Slide lockwashers onto bolts, insert through brackets, and secure with whizlock nuts. NOTE: DO NOT tighten bolts at this time.
5.Repeat steps
6.Position skyhook between arrows on label. When correctly positioned skyhook will be aligned to the center of the gen head and engine as shown.
Failure to properly position skyhook
can cause property damage, serious injury or death, and void the manufacturer’s warranty.
11- ENG | D28512 |