Once the | menu is selected, enter the RC* code written under the |
base and press 
to confirm.
Warning : If you wish to associate non Philips handsets to the Kala 300 range base stations, make sure that this handset is GAP compliant otherwise it will not operate properly.
✦To unregister the handset
WXYZ | GHI | enter the RC code* |
✦To unregister all the handsets (except the handset you are using)
WXYZ | JKL | enter the RC code* |
Warning : Once unregistered, the handset is no longer operational.
*RC code (Registration Code) is written under the base.
Other technical settings (country dependent)
If your network operator is not the main national network operator, you may have to change the line settings. Some of the following settings are available subject to a subscription with your operator and also technical availability.
The options on this menu are country dependent and some may not exist in certain countries.
To enter the following settings : 
or
DEF
To scroll through the menus
Press 
to exit the programming option.
✦Changing Caller Identification type
The Caller Identification service (Name and Number) is available subject to a subscription to your operator (according to availability). (Country dependent)
or | DEF | to choose the right setting among the list |
✦Changing the dial mode
This allows you to select either DTMF tone dialling (faster dialling, access to operator services) or pulse dialling (also called “Loop disconnect” and used in countries without DTMF capability).The default value is TONE. (Country dependent, you may not be able to change to “Pulse”).
or | DEF | to choose TONE or PULSE |
✦Changing recall type
The use of some services accessed with 
(call waiting, call forward...) will
depend on the flash setting (short/long) according to your installation type (ISDN, Public, PABX). (Country dependent)
or | DEF | to choose between Short or Long |
: Short . 
: Long.
14
