2.USB device wake-up (3-pin PS2_USBPW)
This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 500 mA on the +5VSB lead, and a corresponding setting in the BIOS.
P5KPL-VM USB Device Wake Up
•The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system would not power up.
•The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode.
1-26 | Chapter 1: Product introduction |
