1.10.2Internal connectors
1.Floppy disk drive connector
This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when using a FDD cable with a covered Pin 5.
FLOPPY
PIN 1
NOTE: Orient the red markings on the floppy ribbon cable to PIN 1.
2.Digital Audio connector
This connector is for the S/PDIF audio module to allow digital sound output. Connect one end of the S/PDIF audio cable to this connector and the other end to the S/PDIF module.
+5V SPDIFOUT GND
SPDIF_OUT
The S/PDIF out module is purchased separately.
ASUS |