Chassis Fan Speed [xxxxRPM] or [N/A] or [Ignored]

The onboard hardware monitor automatically detects and displays the chassis fan speed in rotations per minute (RPM). If the fan is not connected to the chassis, the specific field shows N/A. Select Ignored if you do not wish to display the detected speed.

VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage

The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators.

2.6Boot menu

The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu.

Boot settings

Boot Device Priority

Boot Settings Configuration

Security

2.6.1Boot Device Priority

Specifies the Boot Device Priority sequence.

A virtual floppy disk drive (Floppy Drive B:

)may appear when you set the CD-ROM drive as the first boot device.

Select Screen

Select Item

Enter Go to Sub-screen

F1 General Help

F10 Save and Exit

ESC Exit

Boot Device Priority

1st Boot Device 2nd Boot Device 3rd Boot Device

[1st FLOPPY DRIVE] [Hard Drive] [ATAPI CD-ROM]

Specifies the boot sequence from the available devices.

1st ~ xxth Boot Device [1st Floppy Drive]

These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. Configuration options: [xxxxx Drive] [Disabled]

2-30

Chapter 2: BIOS setup