ASSEMBLY
1.Place handle assembly onto frame and connect handle to frame.
3.Attach high pressure hose to gun. Tighten securely.
2.Connect wand to gun. Tighten securely.
5.Assemble grommet kit and
6.Add engine oil (supplied) to engine. Refer to engine manual supplied by engine manufacturer
for correct procedure.
NOTE: There will be a slight amount of oil in the engine from factory test- ing.
NOTE: The high pressure pump was filled with oil at the factory. There is no need to add oil at this time, see the Maintenance section of this man- ual for Maintenance information.
9- ENG | D25115 |
