ASSEMBLY
1.Place handle assembly onto frame and connect handle to frame.
2.Connect wand to gun. Tighten securely.
3.Attach high pressure hose to gun. Tighten securely.
5.Assemble grommet kit and
6.Add engine oil (supplied) to engine. Refer to engine manual supplied by
engine manufacturer for correct procedure.
NOTE: There will be a slight amount of oil in the engine from factory testing.
NOTE: The high pressure pump was filled with oil at the factory. There is no need to add oil at this time, see the Maintenance section of this manual for Maintenance information.
7- ENG | D25803 |
