SERVICE AND ADJUSTMENTS

TO START ENGINE WITH A WEAK BATTERY (See Fig. 32)

CAUTION: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from bat- teries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the CUSTOMER RESPON- SIBILITIES section of this manual).

Install new battery with terminals in same position as old battery.

Reinstall terminal guard.

First connect RED battery cable to positive (+) battery terminal with hex bolt and keps nut as shown. Tighten securely.

Connect BLACK grounding cable to negative (-) battery terminal with remaining hex bolt and keps nut. Tighten securely

Close terminal access doors.

Close hood.

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT NEGATIVE GROUNDED SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT NEGATIVE GROUNDED SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

• Connect each end of the RED cable to the POSITIVE (+)

terminal of each battery, taking care not to short against

chassis.

KEPS NUT

TERMINAL

ACCESS

DOOR

TERMINAL

GUARD

HEX

BOLT

POSITIVE (RED)

CABLE

NEGATIVE (BLACK)

CABLE

Connect one end of the BLACK cable to the NEGATIVE

 

(-) terminal of fully charged battery.

Connect the other end of the BLACK cable to good

 

CHASSIS GROUND, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

BLACK cable first from chassis and then from the fully charged battery.

RED cable last from both batteries.

“POSITIVE”

“NEGATIVE”

(-)

(+)

 

 

L.H. PANEL

 

BOLT

FIG. 32

REPLACING BATTERY (See Fig. 33)

CAUTION: Do not short battery termi- nals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands,rings,etc.

Positive terminal must be connected first to prevent sparking from accidental grounding.

Lift hood to raised position.

Remove terminal guard.

Disconnect BLACK battery cable then RED battery cable and carefully remove battery from tractor.

FIG. 33

TO REPLACE HEADLIGHT BULB

Raise hood.

Pull bulb holder out of the hole in the backside of the grill.

Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

Check wiring. See electrical wiring diagram in the Repair Parts section.

TO REPLACE FUSE

Replace with 30 amp automotive-type plug-in fuse. The fuse holder is located behind the dash.

TO ADJUST ATTACHMENT LIFT SPRING (See Fig. 34)

While holding spring bushing with wrench, loosen jam nut.

Turn adjustment bolt clockwise to extend spring and reduce lift effort for heavier attachments.

Turn adjustment bolt counterclockwise for lighter at- tachments.

Retighten jam nut against spring bushing.

IMPORTANT: DO NOT ADJUST FOR MAXIMUM SPRING TENSION WHEN USING LIGHT ATTACHMENTS SUCH AS A MOWER. ADJUST LIFT LEVER SPRING TO AID IN LIFTING ATTACHMENT. DO NOT OVERPOWER SPRING. WHEN REMOVING ATTACHMENT, ALWAYS ADJUST SPRING TENSION TO ITS LOWEST POSITION.

24

Page 24
Image 24
Poulan 178500 owner manual To Replace Headlight Bulb, Interlocks and Relays, To Replace Fuse

178500 specifications

The Poulan 178500 is a powerful and versatile string trimmer that caters to the needs of both professional landscapers and homeowners looking for an efficient lawn maintenance tool. Known for its robust design and user-friendly features, the Poulan 178500 stands out in the market of outdoor power equipment.

One of the main features of the Poulan 178500 is its potent 17cc, 2-cycle engine. This engine delivers a strong performance, allowing users to tackle tough grass, weeds, and overgrown areas with ease. The 2-cycle technology ensures that the trimmer is not only powerful but also lightweight, making it easier to maneuver during extended use. Users will benefit from a balanced weight distribution, which minimizes user fatigue.

Equipped with a dual-line cutting head, the Poulan 178500 ensures efficient cutting performance. The dual-line system offers a wider cutting path, enabling greater coverage with each pass. This feature is especially beneficial for larger yards or heavily landscaped areas, as it reduces the time spent on trimming tasks. Additionally, the trimmer utilizes a bump-feed line advancement system, allowing users to easily release more line with a simple tap on the ground, keeping productivity high without interruptions.

The ergonomic design of the Poulan 178500 enhances user comfort and usability. It boasts cushioned grips that reduce vibration and improve handling. Furthermore, the adjustable handle allows users to customize the position for optimal control, making trimming at various angles easier and more efficient.

Another remarkable characteristic of the Poulan 178500 is its ease of starting. The trimmer is equipped with a simplified starting mechanism, minimizing the effort required to get the engine running. This feature is particularly advantageous for those who may struggle with traditional starting methods.

For added convenience, the Poulan 178500 features a lightweight frame, making it one of the more portable options in the string trimmer market. This ease of transport and storage ensures that users can easily move from one area of their property to another without hassle.

In summary, the Poulan 178500 is a high-performance string trimmer that merges power, comfort, and user-friendly technology. Its robust engine, dual-line system, ergonomic design, and easy starting mechanism make it an excellent choice for anyone seeking a reliable and efficient lawn maintenance tool. Whether for professional landscaping or routine yard care, the Poulan 178500 is built to meet diverse trimming demands while delivering excellent results.