SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before performing any service or ad- justments:

1.Be sure throttle is in STOP position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute defl ector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the defl ector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 18)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shoulder/shear bolt and hex nut. Should a for- eign object or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place it wear it cannot come in contact with spark plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shoulder/shear bolt. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

 

The impeller is secured to the impeller shaft with two (2)

 

capscrew/shear bolts and hex nuts. Should a foreign object

 

or ice become lodged in the impeller, the capscrews are

 

designed to break, preventing damage to any other com-

 

ponents. If impeller does not turn when auger control lever

 

is engaged, check to see if the capscrews have sheared.

 

To replace the capscrew/shear bolts:

16

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place it wear it cannot come in contact with spark plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

 

 

IMPELLER

 

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

 

 

LOCKNUT

AUGER HUB

AUGER SHAFT

FIG. 18

TO REMOVE BELT COVER (See Fig. 19)

1.Remove the two (2) screws securing belt cover to frame.

2.Remove belt cover.

Replace belt cover by installing cover and screws and tighten securely.

 

BELT

 

COVER

FRAME

SCREWS

FIG. 19

Page 16
Image 16
Poulan 187877 owner manual Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector, Shear Bolts See Fig

187877 specifications

The Poulan 187877 is a robust and versatile tool that is designed to meet the needs of both amateur gardeners and professional landscapers. This equipment is particularly recognized for its powerful performance and user-friendly features, making it an excellent choice for a variety of outdoor tasks.

One of the main features of the Poulan 187877 is its potent engine. Equipped with a high-performance two-stroke engine, this model delivers impressive horsepower, ensuring that it can tackle demanding tasks with ease. This engine design not only provides powerful cutting capabilities but also minimizes emissions, adhering to environmental regulations.

Another significant characteristic of the Poulan 187877 is its lightweight construction. Weighing in at just the right amount, this tool allows for extended use without causing fatigue to the operator. Its ergonomic handle design offers a comfortable grip, promoting efficient operation during extended periods of use, whether you're trimming hedges, cutting fallen branches, or undertaking other landscaping activities.

The Poulan 187877 also features an advanced starting system, incorporating a reliable recoil starter that reduces the effort required to start the engine. This feature is particularly advantageous for users who often experience difficult starts in colder weather or are looking for a hassle-free starting experience.

In terms of technology, the Poulan 187877 incorporates an easy-to-access air filter system that simplifies maintenance. This design allows users to clean or replace the filter quickly, ensuring that the tool maintains optimal performance over time. Additionally, the model’s adjustable choke helps adapt to varying conditions, making it versatile in different environments.

The cutting mechanism of the Poulan 187877 is another standout feature. With its sharp, durable blades, the tool provides clean cuts that promote healthy plant growth. The cutting width is sufficient for most tasks, enabling efficient yard maintenance without requiring multiple passes.

Safety is a priority with the Poulan 187877, which includes essential features such as a chain brake and a protective guard that prevent accidental injuries during operation. These safety mechanisms inspire confidence in users, allowing them to focus on their tasks.

In summary, the Poulan 187877 is an impressive piece of equipment that combines power, safety, and user-friendly features. Its robust engine, lightweight design, efficient starting system, and easy maintenance make it a great addition to any gardener's toolkit.