Service and Adjustments, Chute Deflector | Poulan 188047 instruction

SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before performing any service or ad- justments:

1.Be sure throttle is in STOP position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute deﬂ ector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the deﬂ ector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deﬂector removed or damaged.

•To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 20)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shoulder/shear bolt and hex nut. Should a for- eign object or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place it wear it cannot come in contact with spark plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shoulder/shear bolt. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS
The impeller is secured to the impeller shaft with two (2)
capscrew/shear bolts and hex nuts. Should a foreign object
or ice become lodged in the impeller, the capscrews are
designed to break, preventing damage to any other com-
ponents. If impeller does not turn when auger control lever
is engaged, check to see if the capscrews have sheared.
To replace the capscrew/shear bolts:	16

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place it wear it cannot come in contact with spark plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

1/4-20	1/4-20 x 1-5/8	1/4-20 x 2
LOCKNUT	CAPSCREW /	SHOULDER /
	SHEAR BOLT	SHEAR BOLT
	IMPELLER HUB
	IMPELLER
	SHAFT
		AUGER
		HUB
1/4-20
LOCKNUT	AUGER HUB	AUGER SHAFT

FIG. 20

TO REMOVE BELT COVER (See Fig. 21)

1.Remove the two (2) screws securing belt cover to frame.

2.Remove belt cover.

•Replace belt cover by installing cover and screws and tighten securely.

	BELT
	COVER
FRAME	SCREWS

FIG. 21

188047 specifications

The Poulan 188047 is a powerful and versatile chainsaw designed to tackle a range of cutting tasks with efficiency and ease. Known for its robust construction and user-friendly features, this chainsaw has become a popular choice among both homeowners and professionals.

One of the standout features of the Poulan 188047 is its engine power. Equipped with a 42cc two-cycle engine, it provides ample power for cutting through tough materials. The engine is designed for optimal performance, offering a balance of power and fuel efficiency, making it an excellent tool for both light trimming and heavier cutting tasks.

In terms of design, the Poulan 188047 features a lightweight build which enhances maneuverability, allowing users to handle it comfortably for extended periods. The ergonomic design includes an anti-vibration handle that reduces fatigue, enabling operators to work more efficiently. The front guard is also designed to provide extra protection, ensuring safety during operation.

One of the key technologies incorporated in the Poulan 188047 is its easy start system. This innovation simplifies the starting process, making it accessible for users of all experience levels. The chainsaw also utilizes a tool-less chain tensioning system, allowing for quick adjustments without the need for additional tools. This feature saves valuable time, especially during larger cutting jobs when frequent adjustments may be necessary.

Another important characteristic of the Poulan 188047 is its 18-inch guide bar. This size strikes a balance between agility and reach, making it suitable for cutting firewood, felling small to medium-sized trees, and completing landscaping tasks. Coupled with its low-kickback chain, users can operate the chainsaw with confidence, knowing they have a reliable, safe cutting tool at their disposal.

The Poulan 188047 also features an automatic oiling system that lubricates the chain and bar during operation, prolonging the life of the chainsaw and ensuring smooth cutting performance. This system not only enhances durability but also minimizes the maintenance needed, allowing users to focus on their tasks without worrying about constantly checking oil levels.

In summary, the Poulan 188047 encapsulates a blend of power, convenience, and safety features that cater to a wide array of cutting needs. Its user-friendly technologies and ergonomic design make it a trusted choice for those seeking efficiency in their cutting tasks, whether at home or on the job site. With the Poulan 188047, users can expect reliable performance and ease of use, making it a valuable addition to any toolkit.

Poulan 188047 owner manual Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector

Models: 188047