OPERATION

The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while op- erating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.

HOW TO USE YOUR TRACTOR

TO SET PARKING BRAKE (See Fig. 7)

Your tractor is equipped with an operator presence sens- ing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

Depress clutch/brake pedal into full “BRAKE” position and hold.

Place parking brake lever in “ENGAGED” position and release pressure from clutch/brake pedal. Pedal should remain in “BRAKE” position. Make sure parking brake will hold tractor secure.

ATTACHMENT CLUTCH LEVER "ENGAGED" POSITION

THROTTLE/CHOKE

IGNITION

CONTROL

KEY

"DISENGAGED" POSITION

"BRAKE"

PARKING BRAKE

POSITION

"ENGAGED"

 

POSITION

 

MOTION

CLUTCH/BRAKE

CONTROL

PEDAL "DRIVE"

LEVER

POSITION

PARKING BRAKE

 

"DISENGAGED" POSITION

FIG. 7

STOPPING (See Fig. 7)

MOWER BLADES -

To stop mower blades,move attachment clutch lever to “DISENGAGED” position.

GROUND DRIVE -

To stop ground drive, depress clutch/brake pedal into full “BRAKE” position.

Move motion control lever to neutral (N) position.

IMPORTANT: THE MOTION CONTROL LEVER DOES NOT RETURN TO NEUTRAL (N) POSITION WHEN THE CLUTCH/ BRAKE PEDAL IS DEPRESSED.

ENGINE -

Move throttle control to slow position.

NOTE: Failure to move throttle control to slow position and allowing engine to idle before stopping may cause engine to “backfire”.

Turn ignition key to “OFF” position and remove key. Always remove key when leaving tractor to prevent unauthorized use.

Never use choke to stop engine.

IMPORTANT: LEAVING THE IGNITION SWITCH IN ANY

 

POSITION OTHER THAN "OFF" WILL CAUSE THE BATTERY

 

TO BE DISCHARGED, (DEAD).

11

 

NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause “browning” of grass. To eliminate this possibility, al- ways stop engine when stopping tractor on grass areas.

CAUTION: Always stop tractor com- pletely,as described above,before leav- ing the operator's position; to empty grass catcher, etc.

TO USE THROTTLE CONTROL (See Fig. 7)

Always operate engine at full throttle.

Operating engine at less than full throttle reduces the battery charging rate.

Full throttle offers the best bagging and mower perfor- mance.

TO MOVE FORWARD AND BACKWARD (See Fig. 7)

The direction and speed of movement is controlled by the motion control lever.

Start tractor with motion control lever in neutral (N) position.

Release parking brake.

Slowly move motion control lever to desired position.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 7)

The position of the attachment lift lever determines the cutting height.

Grasp lift lever.

Press plunger with thumb and move lever to desired position.

The cutting height range is approximately 1-1/2 to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS (See Fig. 8)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE:Adjust gauge wheels with tractor on a flat level surface.

Page 11
Image 11
Poulan 188774 owner manual HOW to USE Your Tractor

188774 specifications

The Poulan 188774 is a versatile and powerful tool designed for those who seek efficiency and performance in their outdoor tasks. This chainsaw is particularly well-suited for homeowners and light commercial users who need a reliable solution for cutting firewood, trimming trees, or clearing brush.

One of the standout features of the Poulan 188774 is its robust engine. Powered by a 2-cycle gas engine, this chainsaw delivers impressive power while maintaining a lightweight frame, making it easy to maneuver during operations. The engine is designed to provide high torque and a rapid chain speed, ensuring that cuts are swift and clean. With a displacement of 50cc, users can expect optimal performance regardless of the task at hand.

In terms of technology, the Poulan 188774 incorporates advanced features such as an automatic chain oiler, which helps to keep the chain lubricated during operation. This not only prolongs the life of the chain but also ensures that the chainsaw operates smoothly, reducing the risk of overheating. Additionally, the tool has an easy-access air filter that simplifies maintenance, allowing users to keep the engine running smoothly with minimal effort.

The chainsaw also features a comfortable and ergonomic handle, which reduces fatigue during extended use. This is particularly beneficial for users who may face long hours of cutting or trimming. The anti-vibration system is another notable technology that enhances user experience, minimizing the vibrations felt in the hands and arms, thereby improving control and precision.

Safety is a priority with the Poulan 188774, which includes essential safety features such as a chain brake that instantly stops the chain in the event of kickback. The easy-to-use start system is designed to enable a hassle-free ignition, allowing users to get to work without delays.

In conclusion, the Poulan 188774 stands out for its combination of power, efficiency, and user-friendly features. With its durable construction and advanced technologies, this chainsaw is a reliable choice for anyone looking to tackle their outdoor cutting needs effectively and safely. Whether you're a weekend warrior or a seasonal user, the Poulan 188774 provides the performance you need to get the job done.