SERVICE AND ADJUSTMENTS

MOTION CONTROL

NEUTRAL

LEVER

LOCK GATE

 

ADJUSTMENT

BOLT

FIG. 26

TRANSMISSION REMOVAL/REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and before operating the tractor. See“PURGETRANSMISSION” in the Operation section of this manual.

TO ADJUST STEERING WHEEL ALIGN- MENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor.If damage has occurred to affect the front wheel toe-in or camber, contact your nearest authorized service center/department.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 27)

TO START ENGINE WITH A WEAK BATTERY (See Fig. 28)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the MAINTENANCE sec- tion of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

BLACK cable first from chassis and then from the fully charged battery.

RED cable last from both batteries.

Block up axle securely.

Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

Repair tire and reassemble.

On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

Replace washers and snap retaining ring securely in axle groove.

Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

and corrosion.

WASHERS

RETAINING

RING

AXLE COVER

SQUARE KEY (REAR

WHEEL ONLY)

FIG. 27

FIG. 28

REPLACING BATTERY (See Figs. 29 and 30)

WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connect- ing battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparking from acci- dental grounding.

22

Page 22
Image 22
Poulan 188774 Transmission REMOVAL/REPLACEMENT, To Adjust Steering Wheel ALIGN- Ment, Front Wheel TOE-IN/CAMBER

188774 specifications

The Poulan 188774 is a versatile and powerful tool designed for those who seek efficiency and performance in their outdoor tasks. This chainsaw is particularly well-suited for homeowners and light commercial users who need a reliable solution for cutting firewood, trimming trees, or clearing brush.

One of the standout features of the Poulan 188774 is its robust engine. Powered by a 2-cycle gas engine, this chainsaw delivers impressive power while maintaining a lightweight frame, making it easy to maneuver during operations. The engine is designed to provide high torque and a rapid chain speed, ensuring that cuts are swift and clean. With a displacement of 50cc, users can expect optimal performance regardless of the task at hand.

In terms of technology, the Poulan 188774 incorporates advanced features such as an automatic chain oiler, which helps to keep the chain lubricated during operation. This not only prolongs the life of the chain but also ensures that the chainsaw operates smoothly, reducing the risk of overheating. Additionally, the tool has an easy-access air filter that simplifies maintenance, allowing users to keep the engine running smoothly with minimal effort.

The chainsaw also features a comfortable and ergonomic handle, which reduces fatigue during extended use. This is particularly beneficial for users who may face long hours of cutting or trimming. The anti-vibration system is another notable technology that enhances user experience, minimizing the vibrations felt in the hands and arms, thereby improving control and precision.

Safety is a priority with the Poulan 188774, which includes essential safety features such as a chain brake that instantly stops the chain in the event of kickback. The easy-to-use start system is designed to enable a hassle-free ignition, allowing users to get to work without delays.

In conclusion, the Poulan 188774 stands out for its combination of power, efficiency, and user-friendly features. With its durable construction and advanced technologies, this chainsaw is a reliable choice for anyone looking to tackle their outdoor cutting needs effectively and safely. Whether you're a weekend warrior or a seasonal user, the Poulan 188774 provides the performance you need to get the job done.