ASSEMBLY

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(1)

3/4" wrench

Pliers

(2)

7/16" wrenches

Tire pressure gauge

 

 

Utility knife

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).

TO REMOVE TRACTOR FROM CAR- TON

UNPACK CARTON

Remove all accessible loose parts and parts cartons from carton.

Cut along dotted lines on all four panels of carton. Remove end panels and lay side panels flat.

Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL (See Fig. 1)

ASSEMBLE EXTENSION SHAFT AND BOOT

Slide extension shaft onto lower steering shaft. Align mounting holes in extension and lower shafts and install 1/4 hex bolt and locknut. Tighten securely.

IMPORTANT: TIGHTEN BOLT AND NUT SECURELY TO 10-12 FT. LBS TORQUE.

Place tabs of steering boot over tab slots in dash and push down to secure.

INSTALL STEERING WHEEL

Position front wheels of the tractor so they are pointing straight forward.

Remove steering wheel adapter from steering wheel and slide adapter onto steering shaft extension.

Position steering wheel so cross bars are horizontal (left to right) and slide inside boot and onto adapter.

Assemble large flat washer, 1/2 hex nut and tighten securely.

Snap steering wheel insert into center of steering wheel.

Remove protective materials from tractor hood and grill.

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR IS TO ROLL OFF SKID.

INSERT

1/2 LOCK WASHER

LARGE FLAT

WASHER

STEERING

WHEEL

 

STEERING

 

BOOT

 

TABS

ADAPTER

EXTENSION SHAFT

 

 

1/4 HEX BOLT

1/4 LOCKNUT

 

LOWER STEERING SHAFT

TAB SLOTS

FIG. 1

INSTALL SEAT (See Fig. 2)

Adjust seat before tightening adjustment knob.

Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

Pivot seat and pan forward and assemble adjustment knob and flat washer loosely. Do not tighten.

Lower seat into operating position and sit on seat.

Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

Get off seat without moving its adjusted position.

Raise seat and tighten adjustment knob securely.

6

Page 6
Image 6
Poulan 188774 Tools Required for Assembly, To Remove Tractor from CAR- TON, Before Removing Tractor from Skid

188774 specifications

The Poulan 188774 is a versatile and powerful tool designed for those who seek efficiency and performance in their outdoor tasks. This chainsaw is particularly well-suited for homeowners and light commercial users who need a reliable solution for cutting firewood, trimming trees, or clearing brush.

One of the standout features of the Poulan 188774 is its robust engine. Powered by a 2-cycle gas engine, this chainsaw delivers impressive power while maintaining a lightweight frame, making it easy to maneuver during operations. The engine is designed to provide high torque and a rapid chain speed, ensuring that cuts are swift and clean. With a displacement of 50cc, users can expect optimal performance regardless of the task at hand.

In terms of technology, the Poulan 188774 incorporates advanced features such as an automatic chain oiler, which helps to keep the chain lubricated during operation. This not only prolongs the life of the chain but also ensures that the chainsaw operates smoothly, reducing the risk of overheating. Additionally, the tool has an easy-access air filter that simplifies maintenance, allowing users to keep the engine running smoothly with minimal effort.

The chainsaw also features a comfortable and ergonomic handle, which reduces fatigue during extended use. This is particularly beneficial for users who may face long hours of cutting or trimming. The anti-vibration system is another notable technology that enhances user experience, minimizing the vibrations felt in the hands and arms, thereby improving control and precision.

Safety is a priority with the Poulan 188774, which includes essential safety features such as a chain brake that instantly stops the chain in the event of kickback. The easy-to-use start system is designed to enable a hassle-free ignition, allowing users to get to work without delays.

In conclusion, the Poulan 188774 stands out for its combination of power, efficiency, and user-friendly features. With its durable construction and advanced technologies, this chainsaw is a reliable choice for anyone looking to tackle their outdoor cutting needs effectively and safely. Whether you're a weekend warrior or a seasonal user, the Poulan 188774 provides the performance you need to get the job done.