OPERATION

TO OPERATE MOWER (See Fig. 6)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

Select desired height of cut.

Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped,or the deflector shield in place.

"ENGAGED" POSITION

ATTACHMENT LIFT LE-

VER HIGH POSITION

LOW

POSITION

ATTACHMENT CLUTCH LEVER "DISENGAGED" POSITION

DEFLECTOR

SHIELD

FIG. 6

TO OPERATE ON HILLS

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

Choose the slowest speed before starting up or down hills.

Avoid stopping or changing speed on hills.

If slowing is necessary, move throttle control lever to slower position.

If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

To restart movement, slowly release parking brake and clutch/brake pedal.

Make all turns slowly.

TO TRANSPORT

Raise attachment lift to highest position with attachment lift control.

When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

Check engine oil with tractor on level ground.

Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until “FULL” mark on dipstick is reached. Do not overfill.

For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Maintenance section of this manual).

To change engine oil, see the Maintenance section in this manual.

ADD GASOLINE

Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

IMPORTANT: WHEN OPERATING IN TEMPERATURES BELOW32°F(0°C), USE FRESH, CLEAN WINTER GRADE GASOLINE TO HELP INSURE GOOD COLD WEATHER STARTING.

12

Page 12
Image 12
Poulan 190785 manual Before Starting the Engine

190785 specifications

The Poulan 190785 is a powerful and versatile chainsaw designed for both professional and residential forestry tasks. This model is particularly noted for its reliability and efficiency, making it a popular choice among users who require a robust tool for cutting, pruning, and tree removal.

One of the standout features of the Poulan 190785 is its powerful engine. It typically comes equipped with a 2-cycle gas engine that delivers impressive horsepower, ensuring that users can tackle even the toughest jobs with ease. The engine design focuses on minimizing fuel consumption while maximizing power, which allows for longer operational periods before needing to refuel.

The chainsaw features a 18-inch bar and chain, providing an optimal cutting length for a variety of applications, from trimming branches to felling small to medium-sized trees. The chain speed is notably high, which enhances cutting efficiency and reduces the physical effort needed by the operator. Additionally, the bar is designed with a low kickback feature, enhancing safety during use.

In terms of usability, the Poulan 190785 incorporates several ergonomic designs. The comfortable handle is designed for better grip and control, reducing user fatigue during extended operation. The chainsaw also includes an automatic oiling system, which ensures that the chain operates smoothly, reducing wear and extending the tool's lifespan.

Safety is a priority with the Poulan 190785, which includes features such as a chain brake that immediately stops the chain in case of kickback, protecting the operator from potential injuries. The chainsaw’s lightweight construction further enhances its maneuverability, allowing users to easily navigate around their work environment.

Maintenance is made simpler with the Poulan 190785 due to its easy-access air filter and carburetor, facilitating routine checks and cleaning. This design consideration ensures that the chainsaw remains in peak operating condition, resulting in a longer service life.

In summary, the Poulan 190785 stands out as a well-rounded chainsaw option, combining power, safety, and ease of use. Whether you are a homeowner looking to maintain your yard or a professional needing a reliable tool for forestry work, the Poulan 190785 delivers performance and efficiency to get the job done effectively. Its durable construction and thoughtful features make it a worthwhile investment for anyone seeking a chainsaw they can count on.