ASSEMBLY

HOW TO SET UP YOUR TRACTOR

INSTALL SEAT (See Fig. 2)

Adjust seat before tightening adjustment bolt.

Remove adjustment bolt, lock washer and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

Pivot seat and pan forward and assemble adjust- ment bolt, lockwasher and flat washer loosely. Do not tighten

Lower seat into operating position and sit on seat.

Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

Get off seat without moving its adjusted position.

Raise seat and tighten adjustment bolt securely.

SEAT

SEAT PAN

SHOULDER

BOLT

FLAT WASHER

LOCK WASHER

02465

ADJUSTMENT

BOLT

FIG. 2

CHECK BATTERY (See Fig. 3)

Lift seat pan to raised position.

If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See “BATTERY” in the Maintenance section of this manual for charging instructions).

SEAT PAN

LABEL

02602

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)

Press lift lever plunger and raise attachment lift lever to its highest position.

Release parking brake by depressing clutch/brake pedal.

Place gearshift lever in neutral (N) position.

Roll tractor forward off skid.

Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Op- eration section for location and function of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

Be sure all the above assembly steps have been com- pleted.

Check engine oil level and fill fuel tank with gasoline.

Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

Place gear shift lever in neutral (N) position.

Press lift lever plunger and raise attachment lift lever to its highest position.

Start the engine.After engine has started, move throttle control to idle position.

Depress clutch/brake pedal into full "BRAKE" position and hold. Move gearshift lever to 1st gear.

Slowly release clutch/brake pedal and slowly drive tractor off skid.

Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

Turn ignition key to "OFF" position.

Continue with the instructions that follow.

7

Page 7
Image 7
Poulan 190785 manual HOW to SET UP Your Tractor, Install Seat See Fig, Check Battery See Fig

190785 specifications

The Poulan 190785 is a powerful and versatile chainsaw designed for both professional and residential forestry tasks. This model is particularly noted for its reliability and efficiency, making it a popular choice among users who require a robust tool for cutting, pruning, and tree removal.

One of the standout features of the Poulan 190785 is its powerful engine. It typically comes equipped with a 2-cycle gas engine that delivers impressive horsepower, ensuring that users can tackle even the toughest jobs with ease. The engine design focuses on minimizing fuel consumption while maximizing power, which allows for longer operational periods before needing to refuel.

The chainsaw features a 18-inch bar and chain, providing an optimal cutting length for a variety of applications, from trimming branches to felling small to medium-sized trees. The chain speed is notably high, which enhances cutting efficiency and reduces the physical effort needed by the operator. Additionally, the bar is designed with a low kickback feature, enhancing safety during use.

In terms of usability, the Poulan 190785 incorporates several ergonomic designs. The comfortable handle is designed for better grip and control, reducing user fatigue during extended operation. The chainsaw also includes an automatic oiling system, which ensures that the chain operates smoothly, reducing wear and extending the tool's lifespan.

Safety is a priority with the Poulan 190785, which includes features such as a chain brake that immediately stops the chain in case of kickback, protecting the operator from potential injuries. The chainsaw’s lightweight construction further enhances its maneuverability, allowing users to easily navigate around their work environment.

Maintenance is made simpler with the Poulan 190785 due to its easy-access air filter and carburetor, facilitating routine checks and cleaning. This design consideration ensures that the chainsaw remains in peak operating condition, resulting in a longer service life.

In summary, the Poulan 190785 stands out as a well-rounded chainsaw option, combining power, safety, and ease of use. Whether you are a homeowner looking to maintain your yard or a professional needing a reliable tool for forestry work, the Poulan 190785 delivers performance and efficiency to get the job done effectively. Its durable construction and thoughtful features make it a worthwhile investment for anyone seeking a chainsaw they can count on.