ASSEMBLY/PRE-OPERATION

Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. Review the video cassette before you begin.

TOOLS REQUIRED FOR

ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes you need are listed below.

(1)

3/4" wrench

(1)

Pliers

(2)

7/16" wrench

(1)

Utility knife

(1)

Tire pressure gauge

 

When right or left hand is mentioned in this manual, it means, from your point of view, when you are in the operating posi- tion (seated behind the steering wheel).

TO REMOVE TRACTOR FROM CARTON

UNPACK CARTON

1.Remove all accessible loose parts and parts boxes from carton.

2.Cut along dotted lines on all four pan- els of carton. Remove end panels and lay side panels flat.

3.Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL

ASSEMBLE EXTENSION SHAFT AND BOOT

1.Slide extension shaft onto lower steer- ing shaft. Align mounting holes in ex-

tension and lower shafts and install 1/4 hex bolt and locknut. Tighten securely.

IMPORTANT: Tighten bolt and nut se- curely to 10-12 ft. lbs torque.

2.Place tabs of steering boot over tab slots in dash and push down to secure.

INSTALL STEERING WHEEL

3.Position front wheels of the tractor so they are pointing straight forward.

4.Remove steering wheel adapter from steering wheel and slide adapter onto steering shaft extension.

5.Position steering wheel so cross bars are horizontal (left to right) and slide inside boot and onto adapter.

6.Assemble large flat washer, 1/2 hex nut and tighten securely.

Insert

1/2 Hex Nut

Large Flat Washer

Steering

Steering Boot

Wheel

Tabs

Adapter

Extension Shaft

1/4 Locknut

1/4 Hex Bolt

Lower

Steering

Shaft

Tab

Slots

7.Snap steering wheel insert into center of steering wheel.

8.Remove protective materials from trac- tor hood and grill.

IMPORTANT: Check for and remove any staples in skid that may puncture tires where tractor is to roll off skid.

HOW TO SET UP YOUR TRACTOR

INSTALL SEAT

Adjust seat before tightening adjustment knob.

1.Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

2.Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

3.Place seat on seat pan so head of shoulder bolt is positioned over large

8

Page 7 Page 9
Page 8
Image 8
Poulan 191606 manual Tools Required for Assembly, To Remove Tractor from Carton, Before Removing Tractor from Skid
Page 7 Page 9

191606 specifications

The Poulan 191606 is a chainsaw that makes a solid addition to any home or workshop, designed primarily for both light and medium-duty tasks. This versatile tool is ideal for homeowners, landscapers, and DIY enthusiasts who require a reliable and efficient chainsaw for various cutting needs.

One of the standout features of the Poulan 191606 is its powerful engine. Equipped with a 2-cycle engine, it delivers sufficient power to cut through logs, branches, and dense foliage with ease. The engine is not only robust but also designed to be fuel-efficient, which means users can accomplish more work without frequently stopping to refuel.

The chainsaw boasts an 18-inch bar and chain, providing an excellent balance between reach and maneuverability. The length is suitable for cutting medium-sized trees and performing precise pruning tasks while still being manageable for users of all experience levels.

Another noteworthy characteristic of the Poulan 191606 is its ease of use. The chainsaw features an automatic oiling system that ensures consistent lubrication of the bar and chain, enhancing durability and extending the life of the tool. This feature reduces maintenance chores for users, allowing them to focus more on their cutting tasks.

Moreover, the Poulan 191606 is equipped with a simple starting system that includes an easy-to-pull starter mechanism, which minimizes the effort required to get the saw running. This user-friendly design makes it accessible for both novice and experienced operators.

For added safety, the Poulan 191606 is fitted with features like a chain brake, which is crucial for preventing kickback, ensuring that users can operate the saw with peace of mind. Additionally, the handle is designed for comfort and control, providing a secure grip that can help reduce fatigue during extended use.

In summary, the Poulan 191606 combines power, efficiency, and user-friendly features, making it a commendable choice for anyone in need of a reliable chainsaw. Its durable construction, automatic oiling system, and safety features make it suitable for a range of applications, from simple yard maintenance to more extensive landscaping projects, ensuring that users can tackle their tasks effectively. Whether you're trimming branches or cutting firewood, the Poulan 191606 is designed to deliver consistent performance and reliability.
Top Page Image Contents