SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before performing any service or ad- justments:

1.Be sure throttle is in STOP position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute defl ector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the defl ector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 19)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shoulder/shear bolt and hex nut. Should a for- eign object or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shoulder/shear bolt. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

 

The impeller is secured to the impeller shaft with two (2)

 

capscrew/shear bolts and hex nuts. Should a foreign object

 

or ice become lodged in the impeller, the capscrews are

 

designed to break, preventing damage to any other com-

 

ponents. If impeller does not turn when auger control lever

 

is engaged, check to see if the capscrews have sheared.

 

To replace the capscrew/shear bolts:

16

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

 

 

IMPELLER

 

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

 

 

LOCKNUT

AUGER HUB

AUGER SHAFT

FIG. 19

TO REMOVE BELT COVER (See Fig. 20)

1.Remove the two (2) screws securing belt cover to frame.

2.Remove belt cover.

Replace belt cover by installing cover and screws and tighten securely.

 

BELT

 

COVER

FRAME

SCREWS

FIG. 20

Page 16
Image 16
Poulan 192034 owner manual Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector, Shear Bolts See Fig

192034 specifications

The Poulan 192034 is a versatile and high-performing chainsaw that caters to both professional users and homeowners looking for a reliable tool for various cutting tasks. Designed for durability and efficiency, the Poulan 192034 excels in handling both light and heavy-duty applications. One of its standout features is its powerful engine, which ensures optimal cutting performance even in tough conditions.

Equipped with a 38cc two-stroke engine, the Poulan 192034 delivers impressive power, allowing users to tackle everything from tree trimming to firewood cutting. The engine is designed to provide a good balance of torque and speed, enabling users to make quick work of dense materials. Furthermore, the chainsaw comes with a 16-inch bar, offering a perfect size for both residential and commercial cutting needs, making it ideal for various applications including pruning, felling small trees, and cutting logs.

One of the remarkable technologies employed in the Poulan 192034 is the Easy Start system, which significantly reduces the effort required to start the chainsaw. This innovative feature allows users to get to work quickly without the frustration often associated with starting gas-powered tools. In addition to Easy Start, the chainsaw is equipped with an automatic oiling system that ensures the chain and bar receive the necessary lubrication during operation, minimizing wear and prolonging the life of these critical components.

User comfort is also a key focus in the design of the Poulan 192034. The chainsaw features a lightweight and ergonomic design that reduces user fatigue during extended use. The anti-vibration technology incorporated into the handle absorbs shocks, making it easier to handle the tool for longer periods without discomfort. This is particularly valuable for professionals who may be using the chainsaw for multiple hours at a time.

Another advantage of the Poulan 192034 is its safety features, including a chain brake that engages quickly in the event of kickback, protecting the user from potential injuries. The easy-access air filter and tool-less chain tensioning system enhance convenience, allowing users to maintain the chainsaw effortlessly.

Overall, the Poulan 192034 stands out as a reliable, efficient, and user-friendly chainsaw equipped with essential features and technologies that meet the needs of both casual users and professionals alike. With its solid performance and thoughtful design, it is a valuable addition to any toolkit.