Poulan 193732 manual III. Children, IV. Safe Handling of Gasoline, General Service, Do not

•Remove obstacles (rocks, tree limbs, etc.)

•Watch for holes, ruts, or bumps. Tall grass can hide obstacles.

DO NOT:

•Do not trim near drop-offs, ditches or embankments. The operator could lose footing or balance.

•Do not trim excessively steep slopes.

•Do not mow on wet grass. Reduced foot- ing could cause slipping.

III. CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

•Keep children out of the trimming area and under the watchful care of another responsible adult.

•Be alert and turn machine off if children enter the area.

•Before and while walking backwards, look behind and down for small children.

•Never allow children to operate the mower.

•Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

IV. SAFE HANDLING OF GASOLINE

Use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

•Extinguish all cigarettes, cigars, pipes and other sources of ignition.

•Use only an approved container.

•Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling.

•Never refuel the machine indoors.

•Never store the machine or fuel contain- er where there is an open flame, spark or pilot light such as a water heater or on other appliances.

•Never fill containers inside a vehicle, on a truck or trailer bed with a plastic liner. Always place containers on the ground

away from your vehicle before filling.

•Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equip- ment with a portable container, rather than from a gasoline dispenser nozzle.

•Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

•If fuel is spilled on clothing, change clothing immediately.

•Never overfill fuel tank. Replace gas cap and tighten securely.

V. GENERAL SERVICE

•Never run machine inside a closed area.

•Never make adjustments or repairs with the engine (motor) running. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting.

•Keep nuts and bolts, especially blade attachment bolts, tight and keep equip- ment in good condition.

•Never tamper with safety devices. Check their proper operation regularly.

•Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage. Allow machine to cool before storing.

•Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

•Never attempt to make wheel height adjustments while the engine is running.

•Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects tobethrown.Frequentlycheckcomponents and replace with manufacturer’s recom- mended parts, when necessary.

•Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

•Do not change the engine governor set- ting or overspeed the engine.

•Maintain or replace safety and instruc- tion labels, as necessary.

CONGRATULATIONS on your purchase of a new Lawn Mower. It has been designed, engi- neered and manufactured to give you the best possible dependability and performance. Should you experience any problems you cannot easily remedy, please contact your nearest authorized service center. They have competent, well trained technicians and the proper tools to service or repair this unit.

•Read the SAFETY RULES and this Operator's Manual in its entirety before you at- tempt to assemble or operate your new lawn mower to insure proper operation and to prevent injury to yourself and others. Save this manual for future reference.

•Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.

•All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have

been placed in the parts bag. 3