Poulan 193732 manual Hinge Bracket Mounted, Handle Bracket Mounted, Door Pivot PIN Mounted

“FABRIC TOP” GRASS CATCHERS TO ASSEMBLE AND ATTACH GRASS CATCHER

•Put grass catcher frame into grass bag with rigid part of bag on the bottom.

•Slip vinyl bindings over frame.

NOTE: If vinyl bindings are too stiff, hold them in warm water for a few minutes. If bag gets wet, let it dry before using.

•Lift the rear door on the mower housing.

•For HINGE BRACKET mounted catcher, place the grass catcher frame onto the formed tabs on the rear door hinge bracket.

•For HANDLE BRACKET mounted catcher, place frame side hooks into slots in handle brackets.

•For DOOR PIVOT PIN mounted catcher, place the grass catcher frame hooks onto the door pivot pins.

•For DOOR SLOT mounted catcher, place the grass catcher frame hooks into the slots of the rear door.

NOTE: The grass catcher is secured to the lawn mower housing when the rear door is lowered onto the grass catcher frame.

Frame handle

Vinyl	Frame
bindings	opening

HINGE BRACKET MOUNTED

Rear door

Hinge bracket

Grass catcher frame

Formed tabs

HANDLE BRACKET MOUNTED

Handle bracket hooks	Rear	Grass
	door	catcher
		handle

Catcher frame side hook

DOOR PIVOT PIN MOUNTED

Pivot pins	Rear	Grass
	door	catcher
		handle

CAUTION: Under normal usage, the catcher material is subject to deterioration and wear and should, therefore, be checked frequently for replacement. Any replacement catcher should be checked to ensure compliance with original manufac- turer's specifications.

CAUTION: Do not run lawn mower without the discharge guard (rear door), approved grass catcher, clipping deflector or mulcher plate in place. Never attempt to operate mower with the discharge guard (rear door) removed or propped open.

Catcher frame hook

DOOR SLOT MOUNTED

Rear door slots

Grass catcher handle

Catcher frame hook

6