OPERATION

TO ADJUST GAUGE WHEELS (See Fig. 7)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE:Adjust gauge wheels with tractor on a flat level surface.

•Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in the Operation section of this manual).

•Remove retainer spring and clevis pin which secure each gauge wheel bar.

•Lower gauge wheels to ground. Raise gauge wheels slightly to align holes in bracket and gauge wheel bar and insert clevis pin. Gauge wheels should be slightly off the ground.

•Replace retainer spring into clevis pin.

•Be sure all gauge wheels are in the same setting.

IMPORTANT:BE SURETO READJUST GAUGEWHEELS IFYOU CHANGE THE CUTTING HEIGHT OF THE MOWER DECK.

RETAINER

SPRING

CLEVIS

PIN

FIG. 7

TO OPERATE MOWER (See Fig. 8)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

•Select desired height of cut.

•Start mower blades by engaging attachment clutch control.

•TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped,or the deflector shield in place.

ATTACHMENT CLUTCH SWITCH

PULL OUT TO "ENGAGE"ATTACHMENT LIFT LEVER HIGH POSITION

LOW

POSITION

PUSH IN TO "DISENGAGE"

02876DEFLECTOR

SHIELD

FIG. 8

REVERSE OPERATION SYSTEM (ROS)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.

USING THE REVERSE OPERATION SYSTEM -

•Move motion control lever to neutral (N) position.

•With engine running, turn ignition key counterclockwise to ROS "ON" position.

•Look down and behind before backing.

•Slowly move motion control lever to reverse (R) position to start movement.

•When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" POSITION

ENGINE "ON" POSITION

 

(NORMAL OPERATING)

02828

TO OPERATE ON HILLS

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

12

Page 11 Page 13
Page 12
Image 12
Poulan 195021 To Adjust Gauge Wheels See Fig, To Operate Mower See Fig, Reverse Operation System ROS, To Operate on Hills
Page 11 Page 13

195021 specifications

The Poulan 195021 is a versatile and powerful chainsaw designed for both homeowners and professionals seeking reliability and performance for various cutting tasks. Known for its robust build and user-friendly features, the Poulan 195021 is an excellent choice for those who value efficiency and ease of use.

One of the standout features of the Poulan 195021 is its powerful 20-inch bar and chain, which allows for effective cutting of both small and medium-sized trees, as well as trimming and pruning branches. The 51cc engine provides ample power, making quick work of tough jobs while maintaining a manageable weight for easy handling.

The chainsaw is equipped with a centrifugal air cleaning system that significantly reduces the amount of debris and dust entering the engine. This feature extends the lifespan of the chainsaw by minimizing wear and tear on critical components, ensuring that it operates at peak efficiency over time. The innovative design of the air filter makes it easy for users to maintain and replace when necessary.

Safety is a priority with the Poulan 195021, which includes several crucial safety features. The automatic chain lubrication system keeps the chain fully lubricated during operation, reducing friction and wear while maintaining optimal performance. Additionally, the chainsaw comes with a chain brake that offers an additional layer of protection by stopping the chain instantly in case of kickback.

User comfort is also a crucial aspect of the Poulan 195021's design. It features an ergonomic handle that allows for a secure and comfortable grip, reducing fatigue during extended use. The anti-vibration technology integrated into the chainsaw absorbs the vibrations generated during operation, further enhancing user comfort and promoting better control.

Overall, the Poulan 195021 stands out in the competitive chainsaw market due to its blend of power, safety, and user-friendly features. Whether you are a seasoned professional or a homeowner tackling weekend projects, the Poulan 195021 offers a reliable and efficient solution for your cutting needs. With its robust performance and thoughtful design, it is well-suited for various applications, making it a valuable addition to any toolkit.
Top Page Image Contents