To Replace Headlight Bulb, Interlocks and Relays

SERVICE AND ADJUSTMENTS

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

TO REPLACE HEADLIGHT BULB

•Raise hood.

•Pull bulb holder out of the hole in the backside of the grill.

•Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

•Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

•Check wiring. See electrical wiring diagram in the Repair Parts section.

FIG. 27

REPLACING BATTERY (See Fig. 28)

TO REPLACE FUSE

Replace with 20 amp automotive-type plug-in fuse. The fuse holder is located behind the dash.

WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connect- ing battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected ﬁrst to prevent sparking from acci- dental grounding.

•Lift hood to raised position.

•Remove terminal guard.

•Disconnect BLACK battery cable then RED battery cable and carefully remove battery from tractor.

•Install new battery with terminals in same position as old battery.

•Reinstall terminal guard.

•First connect RED battery cable to positive (+) battery terminal with hex bolt and keps nut as shown. Tighten securely.

•Connect BLACK grounding cable to negative (-) battery terminal with remaining hex bolt and keps nut. Tighten securely

•Close terminal access doors.

•Close hood.

TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 29)

•Raise hood.

•Unsnap headlight wire connector.

•Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.

•To replace, reverse above procedure.

HOOD

HEADLIGHT

WIRE

CONNECTOR

02141

FIG. 29

TERMINAL ACCESS DOOR

KEPS NUT

HEX BOLT

POSITIVE (RED)

CABLE

ENGINE

TO ADJUST THROTTLE CONTROL CABLE

The throttle control has been preset at the factory and adjustment should not be necessary. If adjustment is nec- essary, see engine manual.

TERMINAL GUARD

NEGATIVE (BLACK)

CABLE

TO ADJUST CHOKE CONTROL

The choke control has been preset at the factory and ad- justment should not be necessary. If adjustment is neces- sary, see engne manual.

FIG. 28

TO ADJUST CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your tractor to an authorized service center for repair

23and/or adjustment.

195021 specifications

The Poulan 195021 is a versatile and powerful chainsaw designed for both homeowners and professionals seeking reliability and performance for various cutting tasks. Known for its robust build and user-friendly features, the Poulan 195021 is an excellent choice for those who value efficiency and ease of use.

One of the standout features of the Poulan 195021 is its powerful 20-inch bar and chain, which allows for effective cutting of both small and medium-sized trees, as well as trimming and pruning branches. The 51cc engine provides ample power, making quick work of tough jobs while maintaining a manageable weight for easy handling.

The chainsaw is equipped with a centrifugal air cleaning system that significantly reduces the amount of debris and dust entering the engine. This feature extends the lifespan of the chainsaw by minimizing wear and tear on critical components, ensuring that it operates at peak efficiency over time. The innovative design of the air filter makes it easy for users to maintain and replace when necessary.

Safety is a priority with the Poulan 195021, which includes several crucial safety features. The automatic chain lubrication system keeps the chain fully lubricated during operation, reducing friction and wear while maintaining optimal performance. Additionally, the chainsaw comes with a chain brake that offers an additional layer of protection by stopping the chain instantly in case of kickback.

User comfort is also a crucial aspect of the Poulan 195021's design. It features an ergonomic handle that allows for a secure and comfortable grip, reducing fatigue during extended use. The anti-vibration technology integrated into the chainsaw absorbs the vibrations generated during operation, further enhancing user comfort and promoting better control.

Overall, the Poulan 195021 stands out in the competitive chainsaw market due to its blend of power, safety, and user-friendly features. Whether you are a seasoned professional or a homeowner tackling weekend projects, the Poulan 195021 offers a reliable and efficient solution for your cutting needs. With its robust performance and thoughtful design, it is well-suited for various applications, making it a valuable addition to any toolkit.

Poulan 195021 manual To Replace Headlight Bulb, Interlocks and Relays, To Replace Fuse

Models: 195021