Parts packed separately in carton | Parts Bag | ||
|
|
| Contents |
|
|
| (not shown |
|
|
| full size) |
|
| (1) |
|
|
| Control |
|
|
| Bar |
|
(1) Upper Handle | (1) Lower Handle |
| (1) Rope Guide |
|
| ||
|
|
| (2) Wire |
|
|
| Ties |
|
| (1) |
|
|
| Engine |
|
|
| Zone |
|
(4) Wheels | (1) Discharge Guard | Control | (1) Upstop Bracket |
Cable | |||
ASSEMBLY / PRE-OPERATION
CAUTION: Do not operate this mower without the discharge guard or an entire approved grass catcher in place. These guards are for your protection and are required by the American National Stan- dards Institute and Consumer Products Safety Commission.
CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower.
IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine.
Your new lawn mower has been assem- bled at the factory with the exception of those parts left unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc., necessary to complete the as- sembly have been placed in the parts bag. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.
TOOLS REQUIRED FOR ASSEMBLY
A socket wrench set will make assembly easier. Standard wrench sizes are listed.
(1)5/16" Wrench (1) Adjustable Wrench
(1)7/16" Wrench (1) 9/16" Wrench
(1) 1/2" Wrench (1) 3/4" Wrench
When right hand or left hand is mentioned in this manual, it means when you are standing in the operating position, behind the handle.
UNPACK CARTON
1.Remove all loose parts from carton.
2.Examine all items. Compare with list of unassembled parts and hardware.
3.Remove lawn mower housing with care. Avoid touching blade under housing. Always wear gloves or other protection when working under or lifting mower.
ASSEMBLE LOWER HANDLE NOTE: For ease of lower handle as- sembly, raise rear of mower housing and
6block securely.
