SAFETY RULES

Safe Operation Practices for Ride-On Mowers

DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

WARNING: In order to prevent ac- cidental starting when setting up, transporting, adjusting or making re- pairs, always disconnect spark plug wire and place wire where it cannot contact spark plug.

WARNING: Do not coast down a hill in neutral, you may lose control of the tractor.

WARNING: Tow only the attachments that are recommended by and com- ply with specifications of the manu- facturer of your tractor. Use common sense when towing. Operate only at the lowest possible speed when on a slope. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

WARNING

Engine exhaust, some of its constituents, and cer- tain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Do not operate machine without the entire grass catcher, discharge guard, or other safety devices in place and working.

Slow down before turning.

Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting.

Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge guard.

Operate machine only in daylight or good artificial light.

Do not operate the machine while under the infl uence of alcohol or drugs.

Watch for traffic when operating near or crossing road- ways.

Use extra care when loading or unloading the machine into a trailer or truck.

Always wear eye protection when operating ma- chine.

Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-re- lated injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury.

Follow the manufacturer's recommendation for wheel weights or counterweights.

Keep machine free of grass , leaves or other debris build-up which can touch hot exhaust / engine parts and burn. Do not allow the mower deck to plow leaves or other debris which can cause build-up to occur. Clean any oil or fuel spillage before operating or storing the machine. Allow machine to cool before storage.

WARNING

Battery posts, terminals and related accessories contain lead and lead compounds,chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

I. GENERAL OPERATION

Read, understand, and follow all instructions on the machine and in the manual before starting.

Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.

Only allow responsible adults, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blades.

Be sure the area is clear of bystanders before operat- ing. Stop machine if anyone enters the area.

Never carry passengers.

Do not mow in reverse unless absolutely necessary. Always look down and behind before and while back- ing.

Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Ma- terial may ricochet back toward the operator. Stop the blades when crossing gravel surfaces.

II. SLOPE OPERATION

Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

Mow up and down slopes, not across.

Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Choose a low ground speed so that you will not have to stop or shift while on the slope.

Do not mow on wet grass. Tires may lose traction. Always keep the machine in gear when going down slopes. Do not shift to neutral and coast downhill.

Avoid starting, stopping, or turning on a slope. If the tires lose traction, disengage the blades and proceed slowly straight down the slope.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause the machine to roll over.

Use extra care while operating machine with grass catchers or other attachments; they can affect the stability of the machine. Do no use on steep slopes.

Do not try to stabilize the machine by putting your foot on the ground.

Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in.

2

Page 2
Image 2
Poulan 404973 manual Safety Rules, Safe Operation Practices for Ride-On Mowers, General Operation, II. Slope Operation

404973 specifications

The Poulan 404973 is a powerful and versatile chainsaw designed for both amateur and professional users who require reliable performance for various cutting tasks. Known for its robust build and user-friendly features, the 404973 has become a favored choice among homeowners and landscapers alike.

One of the standout features of the Poulan 404973 is its engine. Powered by a 42cc, two-stroke engine, this chainsaw offers a commendable balance of power and efficiency. This engine delivers ample torque for cutting through dense wood, making it suitable for felling trees, pruning branches, and cutting firewood. The inclusion of a primer bulb allows for quick starts, reducing user frustration during the initial ignition phase.

The design of the Poulan 404973 emphasizes user comfort and control. It is equipped with an ergonomic handle that minimizes vibrations, allowing for extended use without excessive fatigue. Additionally, the chainsaw features a lightweight construction, which further enhances portability and ease of handling. This combination of comfort and control helps users maintain precision during their cutting tasks.

Safety is a key consideration in the design of the Poulan 404973. It comes equipped with a chain brake that protects users from kickback incidents, a common hazard in chainsaw operation. This feature automatically stops the chain in the event of sudden movements or loss of control. Moreover, the chainsaw also includes a safety throttle lock, ensuring that the chain does not operate unexpectedly while starting.

Another impressive aspect of the Poulan 404973 is its automatic oiling system. This technology ensures that the chain remains well-lubricated during use, reducing friction and prolonging the lifespan of both the chain and the guide bar. The oil reservoir is transparent, allowing users to monitor oil levels easily and prevent any interruptions during operation.

Lastly, maintaining the chainsaw is a straightforward process, thanks to features like tool-less chain adjustment and easy access to the air filter. This design simplifies upkeep, enabling users to keep their equipment in optimal condition without requiring extensive technical knowledge.

Overall, the Poulan 404973 stands out as a reliable and functional chainsaw with a blend of power, safety, and user-friendly features that cater to a wide range of cutting needs. Whether for domestic or light commercial use, this chainsaw proves to be a valuable addition to any toolkit.