SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT

MOWER DRIVE BELT REMOVAL (See Fig. 30)

Park tractor on a level surface. Engage parking brake.

Lower attachment lift lever to its lowest position.

Disengage belt tension rod (K) from lock bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a firm grip on rod and release slowly.

Remove screws (P) from mandrel covers (Q) and re- move covers.

Remove any dirt or grass clippings which may have accumulated around mandrels and entire upper deck surface.

Remove belt from electric clutch pulley (M), both man- drel pulleys (R) and all idler pulleys (S).

MOWER DRIVE BELT INSTALLATION

Install belt around all mandrel pulleys (R) and around idler pulleys (S) as shown.

Install belt onto electric clutch pulley (M).

IMPORTANT: Check belt for proper routing in all mower pulley grooves.

Reassemble mandrel covers (Q). Securely tighten all screws.

Engage belt tension rod (K) on locking bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and engage slowly.

Raise attachment lift lever to highest position.

P

Q

LM

TO CHECK BRAKE

If tractor requires more than fi ve (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

Disengage transmission by placing freewheel control in “transmission disengaged” position. Pull freewheel control out and into the slot and release so it is held in the disengaged position.

The rear wheels must lock and skid when you try to manu- ally push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a qualifi ed service center.

TO REPLACE MOTION DRIVE BELT

(See Fig. 31)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

• Disconnect clutch wire harness (A).

• Remove anti-rotation link (B) on right side of tractor.

• Remove belt from stationary idler (C) and clutching

idler (D).

• Remove belt from centerspan idler (E).

• Pull belt slack toward rear of tractor. Carefully remove

belt upwards from transmission input pulley and over

cooling fan blades (F).

• Remove belt downward from engine pulley and around

electric clutch (G).

• Slide belt toward rear of tractor, off the steering plate

KR

R

S

P

Q

(H) and remove from tractor.

BELT INSTALLATION -

• Install new belt from tractor rear to front, over the steer-

ing plate (H) and above clutch brake pedal shaft (J).

• Pull belt toward front of tractor and roll belt around

electric clutch and onto engine pulley (G).

• Pull belt toward rear of tractor. Carefully work belt down

around transmission cooling fan and onto the input

pulley (F). Be sure belt is inside the belt keeper.

• Install belt on centerspan idler (E).

R

FIG. 30

• Install belt through stationary idler (C) and clutching

idler (D).

• Reinstall anti-rotation link (B) on right side of tractor.

Tighten securely.

• Reconnect clutch harness (A).

• Make sure belt is in all pulley grooves and inside all

belt guides and keepers.

• Install mower (See “TO INSTALL MOWER” in this sec-

tion of manual).

23

Page 23
Image 23
Poulan 404973 manual To Replace Mower Blade Drive Belt, To Check Brake, To Replace Motion Drive Belt

404973 specifications

The Poulan 404973 is a powerful and versatile chainsaw designed for both amateur and professional users who require reliable performance for various cutting tasks. Known for its robust build and user-friendly features, the 404973 has become a favored choice among homeowners and landscapers alike.

One of the standout features of the Poulan 404973 is its engine. Powered by a 42cc, two-stroke engine, this chainsaw offers a commendable balance of power and efficiency. This engine delivers ample torque for cutting through dense wood, making it suitable for felling trees, pruning branches, and cutting firewood. The inclusion of a primer bulb allows for quick starts, reducing user frustration during the initial ignition phase.

The design of the Poulan 404973 emphasizes user comfort and control. It is equipped with an ergonomic handle that minimizes vibrations, allowing for extended use without excessive fatigue. Additionally, the chainsaw features a lightweight construction, which further enhances portability and ease of handling. This combination of comfort and control helps users maintain precision during their cutting tasks.

Safety is a key consideration in the design of the Poulan 404973. It comes equipped with a chain brake that protects users from kickback incidents, a common hazard in chainsaw operation. This feature automatically stops the chain in the event of sudden movements or loss of control. Moreover, the chainsaw also includes a safety throttle lock, ensuring that the chain does not operate unexpectedly while starting.

Another impressive aspect of the Poulan 404973 is its automatic oiling system. This technology ensures that the chain remains well-lubricated during use, reducing friction and prolonging the lifespan of both the chain and the guide bar. The oil reservoir is transparent, allowing users to monitor oil levels easily and prevent any interruptions during operation.

Lastly, maintaining the chainsaw is a straightforward process, thanks to features like tool-less chain adjustment and easy access to the air filter. This design simplifies upkeep, enabling users to keep their equipment in optimal condition without requiring extensive technical knowledge.

Overall, the Poulan 404973 stands out as a reliable and functional chainsaw with a blend of power, safety, and user-friendly features that cater to a wide range of cutting needs. Whether for domestic or light commercial use, this chainsaw proves to be a valuable addition to any toolkit.