ASSEMBLY

M

FIG. 10

•Engage belt tension rod (K) on locking bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and en- gage slowly.

•Raise attachment lift lever to highest position.

•If necessary, adjust gauge wheels before operating mower as shown in the Operation section of this manual.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown on tires.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See“TO LEVEL MOWER HOUSING”in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the fi gures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is operating properly. See “TO CHECK BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THATYOU RECEIVE THE BEST PER- FORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged.

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly infl ated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

✓Before driving tractor, be sure freewheel control is in “transmission engaged” position (see “TO TRANS- PORT” in the Operation section of this manual).

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is fi lled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls, their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

✓It is important to purge the transmission before oper- ating your tractor for the fi rst time. Follow proper start- ing and transmission purging instructions (See “TO START ENGINE” and “PURGE TRANSMISSION” in the Operation section of this manual).

9

Page 8 Page 10
Page 9
Image 9
Poulan 404973 manual Check Tire Pressure, Check Deck Levelness, Check for Proper Position of ALL Belts, Check Brake System
Page 8 Page 10

404973 specifications

The Poulan 404973 is a powerful and versatile chainsaw designed for both amateur and professional users who require reliable performance for various cutting tasks. Known for its robust build and user-friendly features, the 404973 has become a favored choice among homeowners and landscapers alike.

One of the standout features of the Poulan 404973 is its engine. Powered by a 42cc, two-stroke engine, this chainsaw offers a commendable balance of power and efficiency. This engine delivers ample torque for cutting through dense wood, making it suitable for felling trees, pruning branches, and cutting firewood. The inclusion of a primer bulb allows for quick starts, reducing user frustration during the initial ignition phase.

The design of the Poulan 404973 emphasizes user comfort and control. It is equipped with an ergonomic handle that minimizes vibrations, allowing for extended use without excessive fatigue. Additionally, the chainsaw features a lightweight construction, which further enhances portability and ease of handling. This combination of comfort and control helps users maintain precision during their cutting tasks.

Safety is a key consideration in the design of the Poulan 404973. It comes equipped with a chain brake that protects users from kickback incidents, a common hazard in chainsaw operation. This feature automatically stops the chain in the event of sudden movements or loss of control. Moreover, the chainsaw also includes a safety throttle lock, ensuring that the chain does not operate unexpectedly while starting.

Another impressive aspect of the Poulan 404973 is its automatic oiling system. This technology ensures that the chain remains well-lubricated during use, reducing friction and prolonging the lifespan of both the chain and the guide bar. The oil reservoir is transparent, allowing users to monitor oil levels easily and prevent any interruptions during operation.

Lastly, maintaining the chainsaw is a straightforward process, thanks to features like tool-less chain adjustment and easy access to the air filter. This design simplifies upkeep, enabling users to keep their equipment in optimal condition without requiring extensive technical knowledge.

Overall, the Poulan 404973 stands out as a reliable and functional chainsaw with a blend of power, safety, and user-friendly features that cater to a wide range of cutting needs. Whether for domestic or light commercial use, this chainsaw proves to be a valuable addition to any toolkit.
Top Page Image Contents