SERVICE AND ADJUSTMENTS

To Replace Mower Drive Belt (See Fig. 24)

MOWER DRIVE BELT REMOVAL

1.Park tractor on a level surface. Engage parking brake.

2.Lower attachment lift lever to its lowest position.

4.Remove any dirt or grass clippings which may have accumulated around mandrels and entire upper deck surface.

5.Remove belt from clutch pulley (M), both mandrel pul- leys (R) and all idler pulleys (S).

MOWER DRIVE BELT INSTALLATION

1.Install belt around both mandrel pulleys (R) and around idler pulleys (S) as shown.

2.Install belt onto clutch pulley (M).

IMPORTANT: Check belt for proper routing in all mower pulley grooves.

3. Raise attachment lift lever to highest position.

'

-

&

12

'

! %

"

0

#

+

,$

FIG. 24

TO REPLACE MOTION BELT DRIVE (See Fig. 25)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

Remove belt from stationary idler (A) and clutching idler (B).

Remove belt from centerspan idler (C).

Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades (D).

Remove belt downward from engine pulley (E).

Slide belt toward rear of tractor, off the steering plate

(F) and remove from tractor.

BELT INSTALLATION -

Install new belt from tractor rear to front, over the steer- ing plate (F) and above clutch brake pedal shaft (G).

Pull belt toward front of tractor and roll belt onto engine pulley (E).

Pull belt toward rear of tractor. Carefully work belt down around transmission cooling fan and onto the input pulley (D). Be sure belt is inside the belt keeper.

Install belt on centerspan idler (C).

Install belt through stationary idler (A) and clutching idler (B).

Make sure belt is in all pulley grooves and inside all belt guides and keepers.

Install mower (See “TO INSTALL MOWER” in this section of manual).

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manu- ally push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a qualified service center.

E

F

A

B G

C

D

22

FIG. 25

 

Page 22
Image 22
Poulan 411188 To Replace Mower Drive Belt See Fig, To Replace Motion Belt Drive See Fig, To Check Brake, Belt Removal

96042003400, 411188 specifications

The Poulan 411188,96042003400 is a high-performance chainsaw designed for both professional and home users who require durability and efficiency in their cutting tasks. This robust tool is engineered to tackle a variety of jobs, from felling trees to pruning branches, making it an essential item for outdoor maintenance and forestry work.

One of the main features of the Poulan 411188 is its potent engine. It is equipped with a powerful 40cc, gas-powered motor that delivers an impressive amount of torque and cutting speed. This power allows users to cut through different types of wood with ease, whether they are working on hardwoods or softer varieties. The engine is designed for optimal fuel efficiency, helping to reduce the frequency of refueling during extended use.

Another standout characteristic of this chainsaw is its lightweight and ergonomic design. Weighing just under 10 pounds, it is user-friendly and easy to maneuver, which is particularly beneficial for extended cutting tasks. The chainsaw also features an anti-vibration handle that minimizes fatigue, allowing for improved control and comfort during operation. This design consideration ensures that the user can maintain accuracy while reducing strain on the hands and arms.

The Poulan 411188 incorporates advanced safety features that make it a reliable choice for both novice and experienced users. A low-kickback chain helps to prevent unexpected jolts during operation, while a chain brake provides an additional layer of safety by stopping the chain’s movement immediately in case of kickback. These features are crucial for preventing accidents and enhancing user confidence.

In terms of technology, the chainsaw features an easy-start system that reduces the effort required to start the engine. This is especially beneficial for users who may struggle with traditional pull-start mechanisms. The transparent fuel tank allows users to easily monitor fuel levels, preventing interruptions during work.

Overall, the Poulan 411188,96042003400 is a versatile and durable chainsaw that offers a blend of power, efficiency, and safety features. Whether for yard work, on the job site, or in a backyard setting, this chainsaw meets the needs of a diverse range of users. Its combination of user-friendly design and robust performance makes it an ideal option for anyone looking to tackle cutting tasks effectively.