Service and Adjustments

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS:

•Depress clutch/brake pedal fully and set parking brake.

•Place gearshift lever in neutral (N) position.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key to “STOP” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 15)

•Place attachment clutch in “DISENGAGED” position.

•Lower attachment lift lever to its lowest position.

•Roll belt off engine pulley (M) and belt keepers (G).

•Remove retainer spring (K), slide collar (L) off and push housing guide (P) out of bracket.

•Remove clutch cable spring (Q) from idler arm (R).

•Disconnect front link (E) from mower - remove retainer spring and washer.

•Go to either side of mower and disconnect mower suspension arm (A) from chassis pin (B) and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers.

CAUTION: AFTER REAR LIFT LINKS

ARE DISCONNECTED, THE ATTACH-

MENT LIFT LEVER WILL BE SPRING

LOADED. HAVE A TIGHT GRIP ON LIFT

LEVER WHEN CHANGING POSITION

OF THE LEVER.

•Slide mower out from under right side of tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE

MOWER IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONT LINK (E) AND REAR LIFT LIKS

(C)FROM TRACTOR AND HOOK THE CLUTCH SPRING

(Q)INTO THE CABLE GUIDE ON FRONT EDGE OF LOWER DASH.

TO INSTALL MOWER (See Fig. 16–19)

Be sure tractor is on level surface and engage parking brake.

•Lower attachment lift lever to it's lowest position.

CAUTION: LIFT LEVER IS SPRING

LOADED. HAVE A TIGHT GRIP ON

LIFT LEVER, LOWER IT SLOWLY AND

ENGAGE IN LOWEST POSITION.

NOTE: Be sure mower side suspension arms (A) are point- ing forward before sliding mower under tractor.

•Slide mower under tractor until it is centered under tractor.

•ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with retainer spring.

•Repeat on opposite side of tractor.

G M F

Q RG

A E

P C

L D

FIG. 15

96042003400, 411188 specifications

The Poulan 411188,96042003400 is a high-performance chainsaw designed for both professional and home users who require durability and efficiency in their cutting tasks. This robust tool is engineered to tackle a variety of jobs, from felling trees to pruning branches, making it an essential item for outdoor maintenance and forestry work.

One of the main features of the Poulan 411188 is its potent engine. It is equipped with a powerful 40cc, gas-powered motor that delivers an impressive amount of torque and cutting speed. This power allows users to cut through different types of wood with ease, whether they are working on hardwoods or softer varieties. The engine is designed for optimal fuel efficiency, helping to reduce the frequency of refueling during extended use.

Another standout characteristic of this chainsaw is its lightweight and ergonomic design. Weighing just under 10 pounds, it is user-friendly and easy to maneuver, which is particularly beneficial for extended cutting tasks. The chainsaw also features an anti-vibration handle that minimizes fatigue, allowing for improved control and comfort during operation. This design consideration ensures that the user can maintain accuracy while reducing strain on the hands and arms.

The Poulan 411188 incorporates advanced safety features that make it a reliable choice for both novice and experienced users. A low-kickback chain helps to prevent unexpected jolts during operation, while a chain brake provides an additional layer of safety by stopping the chain’s movement immediately in case of kickback. These features are crucial for preventing accidents and enhancing user confidence.

In terms of technology, the chainsaw features an easy-start system that reduces the effort required to start the engine. This is especially beneficial for users who may struggle with traditional pull-start mechanisms. The transparent fuel tank allows users to easily monitor fuel levels, preventing interruptions during work.

Overall, the Poulan 411188,96042003400 is a versatile and durable chainsaw that offers a blend of power, efficiency, and safety features. Whether for yard work, on the job site, or in a backyard setting, this chainsaw meets the needs of a diverse range of users. Its combination of user-friendly design and robust performance makes it an ideal option for anyone looking to tackle cutting tasks effectively.

Poulan 96042003400 Service and Adjustments, To Remove Mower See Fig, To Install Mower See Fig

Models: 96042003400 411188