SERVICE AND ADJUSTMENTS

REPLACING BATTERY (See Figs. 29 and 30)

WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connect- ing battery, remove metal bracelets, wristwatch bands, rings, etc. Positive terminal must be connected first to prevent sparking from acci- dental grounding.

•Lift seat pan to raised position.

•Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor.

•Install new battery with terminals in same position as old battery.

•First connect RED battery cable to positive (+) terminal with hex bolt and keps nut as shown. Tighten securely. Slide terminal cover over terminal.

•Connect BLACK grounding cable to negative (-) ter- minal with remaining hex bolt and keps nut. Tighten securely.

SEAT PAN

 

FIG. 29

 

 

TERMINAL

KEPS NUT

COVER

 

HEX

BOLT

POSITIVE (RED) CABLE

NEGATIVE (BLACK) CABLE

 

 

 

FIG. 30

TO REPLACE HEADLIGHT BULB

•Raise hood.

•Pull bulb holder out of the hole in the backside of the grill.

•Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

•Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

•Check wiring. See electrical wiring diagram in the Repair Parts section.

TO REPLACE FUSE

Replace with 20 amp automotive-type plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 31)

•Raise hood.

•Unsnap headlight wire connector.

•Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.

•To replace, reverse above procedure.

HOOD

HEADLIGHT WIRE

CONNECTOR

01536

FIG. 31

ENGINE

TO ADJUST THROTTLE CONTROL CABLE

The throttle control has been preset at the factory and adjustment should not be necessary. If adjustment is nec- essary, see engine manual.

TO ADJUST CHOKE CONTROL

The choke control has been preset at the factory and ad- justment should not be necessary. If adjustment is neces- sary, see engne manual.

TO ADJUST CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your tractor to an authorized service center for repair and/or adjustment.

24

Page 23 Page 25
Page 24
Image 24
Poulan 411188 manual To Replace Headlight Bulb, Interlocks and Relays, To Replace Fuse, To Adjust Throttle Control Cable
Page 23 Page 25

96042003400, 411188 specifications

The Poulan 411188,96042003400 is a high-performance chainsaw designed for both professional and home users who require durability and efficiency in their cutting tasks. This robust tool is engineered to tackle a variety of jobs, from felling trees to pruning branches, making it an essential item for outdoor maintenance and forestry work.

One of the main features of the Poulan 411188 is its potent engine. It is equipped with a powerful 40cc, gas-powered motor that delivers an impressive amount of torque and cutting speed. This power allows users to cut through different types of wood with ease, whether they are working on hardwoods or softer varieties. The engine is designed for optimal fuel efficiency, helping to reduce the frequency of refueling during extended use.

Another standout characteristic of this chainsaw is its lightweight and ergonomic design. Weighing just under 10 pounds, it is user-friendly and easy to maneuver, which is particularly beneficial for extended cutting tasks. The chainsaw also features an anti-vibration handle that minimizes fatigue, allowing for improved control and comfort during operation. This design consideration ensures that the user can maintain accuracy while reducing strain on the hands and arms.

The Poulan 411188 incorporates advanced safety features that make it a reliable choice for both novice and experienced users. A low-kickback chain helps to prevent unexpected jolts during operation, while a chain brake provides an additional layer of safety by stopping the chain’s movement immediately in case of kickback. These features are crucial for preventing accidents and enhancing user confidence.

In terms of technology, the chainsaw features an easy-start system that reduces the effort required to start the engine. This is especially beneficial for users who may struggle with traditional pull-start mechanisms. The transparent fuel tank allows users to easily monitor fuel levels, preventing interruptions during work.

Overall, the Poulan 411188,96042003400 is a versatile and durable chainsaw that offers a blend of power, efficiency, and safety features. Whether for yard work, on the job site, or in a backyard setting, this chainsaw meets the needs of a diverse range of users. Its combination of user-friendly design and robust performance makes it an ideal option for anyone looking to tackle cutting tasks effectively.
Top Page Image Contents