OPERATION

TO THROW SNOW (See Fig. 15)

The auger rotation is controlled by the auger control lever located on the right side handle.

Squeeze auger control lever to handle to engage the auger and throw snow.

Release the auger control lever to stop throwing snow.

AUGER

CONTROL

LEVER

FIG. 15

USING THE CLEAN-OUT TOOL (See Fig. 15)

In certain snow conditions, the discharge chute may be- come clogged with ice and snow. Use the clean-out tool to dislodge this blockage.

When cleaning, repairing, or inspecting, make certain all controls are disengaged and the au- ger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent ac- cidental starting.

Release the auger control lever and shut off the engine.

Remove the clean-out tool from it's mounting clip. Grasp the tool firmly by the handle and push and twist the tool into the discharge chute to dislodge the blockage.

After the packed snow has been dislodged, return the clean- out tool to it's mounting clip by pushing it into the clip.

DISCHARGE CHUTE

CLEAN-OUT

TOOL

MOUNTING CLIP

FIG. 15

Make sure the discharge chute is pointed in a safe direc- tion (no vehicles, buildings, people, or other objects are in the direction of discharge) before restarting the engine.

Restart the engine, then squeeze the auger control lever to the handle to clear snow from the auger hous- ing and the discharge chute.

TO MOVE FORWARD AND BACKWARD (See Fig. 16)

SELF-PROPELLING, forward and reverse movement of the snow thrower, is controlled by the traction drive control lever located on the left side handle.

Squeeze traction drive control lever to handle to engage the drive system.

Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

SPEED and DIRECTION are controlled by the drive speed control lever.

Press downward on the speed control lever and move lever to desired position BEFORE engaging the trac- tion drive control lever. Be sure lever springs back and locks into desired position.

CAUTION: Do not move speed control lever when traction drive control lever is engaged. Damage to the snow thrower can result.

Slower speeds are for heavier snow and faster speeds are for light snow and transporting the snow thrower. It is recommended that you use a slower speed until you are familiar with the operation of the snow thrower.

NOTE: When both traction drive and auger control levers are engaged, the traction drive control lever will lock the auger control lever in the engaged position. This will allow you to release your right hand from the handle and adjust the discharge chute direction without interrupting the snow throwing process.

TRACTION DRIVE

CONTROL LEVER

DRIVE SPEED

CONTROL LEVER

FIG. 16

10

Page 10
Image 10
Poulan 421469 owner manual To Throw Snow See Fig, Using the CLEAN-OUT Tool See Fig, To Move Forward and Backward See Fig

421469 specifications

The Poulan 421469 is a notable chainsaw model widely recognized for its robustness and efficiency, making it a preferred choice among both professional landscapers and casual users alike. This chainsaw is designed to handle a variety of cutting tasks, from felling small trees to pruning branches, thanks to its reliable performance and user-friendly features.

One of the main features of the Poulan 421469 is its powerful engine. The chainsaw is equipped with a 42cc two-stroke engine, providing ample power to tackle tough cutting jobs. This engine design ensures a balance between power and fuel efficiency, allowing users to extend their cutting time without frequent stops for refueling.

The chainsaw is also notable for its 18-inch bar and chain, which not only enhances its cutting capacity but also enables smooth and efficient cuts through various types of wood. The length of the bar allows for increased reach, making it easier to handle larger branches and logs. The high-quality chain ensures durability and sharpness, providing clean cuts without excessive effort.

In addition to its power, the Poulan 421469 incorporates several technologies aimed at improving the user experience. The chainsaw features an automatic oiling system, ensuring that the bar and chain are adequately lubricated during operation. This feature reduces maintenance time for users and enhances the lifespan of the components.

Furthermore, the chainsaw is designed with an ergonomic handle, which offers comfort and control during prolonged use. The lightweight construction of the unit reduces fatigue, enabling users to work for extended periods without discomfort. A safety switch and chain brake enhance user protection, making the chainsaw a safer choice for both beginners and experienced operators.

The Poulan 421469 also emphasizes ease of use, with a tool-free assembly system that simplifies the process of changing the chain or bar. This feature is particularly appealing to users who may not be familiar with more complex chainsaw mechanisms.

In summary, the Poulan 421469 embodies a perfect blend of power, efficiency, and user-friendly features. With its strong engine, robust cutting capability, and thoughtful design elements, it stands out as a reliable and versatile tool for anyone in need of a dependable chainsaw. Whether for professional use or occasional yard work, the Poulan 421469 is equipped to meet diverse cutting needs with confidence.