IMPORTANT

Safe Operation Practices for Walk-Behind Snow Throwers

This snow thrower is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

WARNING: Always disconnect spark plug wire and place it where it cannot contact plug in order to prevent acci- dental starting when setting up, trans- porting, adjusting or making repairs.

WARNING: This snow thrower is for use on sidewalks, driveways and other ground level surfaces. Caution should be exercised while using on sloping sur- faces. Do not use snow thrower on surfaces above ground level such as roofs of residences, garages, porches or other such structures or buildings.

WARNING: Snow throwers have ex- posed rotating parts, which can cause severe injury from contact, or from ma- terial thrown from the discharge chute. Keep the area of operation clear of all persons, small children and pets at all times including startup.

CAUTION: Muffler and other engine parts become extremely hot during operation and remain hot after engine has stopped. To avoid severe burns on contact, stay away from these areas.

WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemi- cals known to the State of California to cause cancer and birth defects or other reproductive harm.

Training

1. Read, understand and follow all instructions on the

 

(f) Keep the nozzle in contact with the rim of the fuel

machine and in the manual(s) before operating this

 

tank or container opening at all times, until refuel-

unit. Be thoroughly familiar with the controls and the

 

ing is complete. Do not use a nozzle lock-open

proper use of the equipment. Know how to stop the

 

device.

unit and disengage the controls quickly.

 

(g) Replace gasoline cap securely and wipe up spilled

2. Never allow children to operate the equipment. Never

 

fuel.

allow adults to operate the equipment without proper

 

(h) If fuel is spilled on clothing, change clothing im-

instruction.

 

 

mediately.

3. Keep the area of operation clear of all persons, par-

 

5. Use extension cords and receptacles as specified by

ticularly small children.

 

the manufacturer for all units with electric drive motors

 

 

 

4. Exercise caution to avoid slipping or falling, especially

 

or electric starting motors.

when operating the snow thrower in reverse.

6. Adjust the collector housing height to clear gravel or

Preparation

 

crushed rock surface.

7. Never attempt to make any adjustments while the

1. Thoroughly inspect the area where the equipment is

 

engine (motor) is running (except when specifically

to be used and remove all doormats, sleds, boards,

 

recommended by manufacturer).

wires, and other foreign objects.

8. Always wear safety glasses or eye shields during op-

2. Disengage all clutches and shift into neutral before

 

eration or while performing an adjustment or repair to

starting the engine (motor).

 

protect eyes from foreign objects that may be thrown

3. Do not operate the equipment without wearing adequate

 

from the machine.

winter garments. Avoid loose fitting clothing that can

Operation

get caught in moving parts. Wear footwear that will

improve footing on slippery surfaces.

1. Do not put hands or feet near or under rotating parts.

4. Handle fuel with care; it is highly flammable

 

Keep clear of the discharge opening at all times.

(a)

Use an approved fuel container.

2. Exercise extreme caution when operating on or cross-

(b)

Never add fuel to a running engine or hot en-

 

ing gravel drives, walks, or roads. Stay alert for hidden

 

hazards or traffic.

 

gine.

 

 

3.

After striking a foreign object, stop the engine (motor),

(c) Fill fuel tank outdoors with extreme care. Never fill

 

remove the wire from the spark plug, disconnect the

 

fuel tank indoors.

 

 

 

cord on electric motors, thoroughly inspect the snow

(d) Never fill containers inside a vehicle or on a truck or

 

 

thrower for any damage, and repair the damage before

 

trailer bed with a plastic liner. Always place contain-

 

restarting and operating the snow thrower.

 

ers on the ground, away from your vehicle, before

4. If the unit should start to vibrate abnormally, stop the

 

filling.

 

 

engine (motor) and check immediately for the cause.

(e)

When practical, remove gas-powered equipment

 

 

Vibration is generally a warning of trouble.

 

from the truck or trailer and refuel it on the ground.

5.

Stop the engine (motor) whenever you leave the oper-

 

If this is not possible, then refuel such equipment

on a trailer with a portable container, rather than

 

ating position, before unclogging the collector/impeller

 

housing or discharge chute, and when making any

from a gasoline dispenser nozzle.

 

2

repairs, adjustments or inspections.

 

 

 

Page 2
Image 2
Poulan 96194000801, 428707 owner manual Safe Operation Practices for Walk-Behind Snow Throwers

96194000801, 961940008, 428707 specifications

The Poulan 428707,96194000801,961940008 is a powerful and versatile outdoor power tool designed for landscaping and yard maintenance. This model impresses with its robust features, advanced technologies, and user-oriented characteristics that cater to both professional landscapers and DIY enthusiasts.

One of the standout features of the Poulan 428707 is its potent engine, designed to deliver reliable performance for a variety of outdoor tasks. The engine's efficiency enables it to tackle demanding jobs such as trimming, edging, and clearing debris, making it an essential tool for maintaining a pristine lawn or garden. The lightweight design of the equipment enhances maneuverability, ensuring that users can easily navigate tight spaces and complex terrains without straining themselves.

In terms of technology, the Poulan 428707 incorporates low-emission capabilities that are compliant with environmental regulations. This means that users can enjoy the powerful performance of the tool while minimizing their environmental footprint. The ergonomic design is another notable technological advancement; it features comfortable grips and adjustable handles, allowing users to work for extended periods without discomfort or fatigue.

The Poulan 428707 is equipped with a range of cutting attachments, offering versatility for different tasks. Whether you need to cut through thick brush or perform delicate trimming, this tool can adapt to meet your needs. The easy-to-use system for swapping out attachments further simplifies the process, making it user-friendly for those who may not have previous experience with such equipment.

Durability is a key characteristic of the Poulan 428707, as it is constructed from high-quality materials designed to withstand wear and tear. This durability ensures longevity, providing users with a reliable tool that can handle seasonal demands year after year.

Overall, the Poulan 428707,96194000801,961940008 stands out as a top choice in outdoor power tools due to its functionality, innovative technologies, and robust build quality. Its combination of power, efficiency, and user-friendly design makes it an indispensable addition to any outdoor maintenance arsenal, positioning it as a leading option for individuals looking to enhance their landscaping capabilities. Whether you're maintaining your home garden or managing larger landscaping projects, this tool will help you achieve professional results with ease.