Manuals / Poulan / Lawn and Garden / Snow Blower

Poulan PR624, 437986, 96192004201 owner manual Engine, Cleaning

Models: PR624 437986 96192004201

1 40
Download 40 pages 12.72 Kb
Page 14
Image 14

MAINTENANCE

BELTS

Check belts for deterioration and wear after every 50 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. (See “TO REMOVE BELT COVER” in the Service and Adjustments section of this manual).

The belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer. Using other than OEM belts can cause personal injury or damage to the snow thrower.

AUGER GEAR CASE

•The gear case was filled with lubricant to the proper level at the factory. The only time the lubricant needs attention is if service has been performed on the gear case.

•If lubricant is required, use only Ronex ED #1 grease.

TRACTION DRIVE SYSTEM

DO NOT lubricate the drive components inside the snow thrower. The sprockets, hex shafts, drive disc and friction wheel require no lubrication. The bearings and bushings are lifetime lubricated and require no maintenance.

CAUTION: Any lubricating of the above compo- nents can cause contamination of the friction wheel and damage to the drive system of your snow thrower.

ENGINE

See engine manual.

LUBRICATION

Use only high quality detergent oil rated with API service classification SG–SL. Select the oil's SAE viscosity grade according to your expected operating temperature.

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 25 hours of operation or at least once a year if the snow thrower is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil fill cap / dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL

Determine temperature range anticipated before next oil change. All oil must meet API service classification SG–SL.

•Be sure snow thrower is on level surface.

•Oil will drain more freely when warm.

•Catch oil in a suitable container.

NOTE: The left side wheel may be removed from snow thrower for easier access to the oil drain plug and place- ment of a suitable container. The unit tilted, resting on the frame with the left wheel removed, will help drain any oil trapped inside the engine. (See “TO REMOVE WHEELS” in the Service and Adjustments section of this manual).

1.Remove safety ignition key and disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Clean area around drain plug.

3.Remove drain plug and drain oil in a suitable container.

4.Install drain plug and tighten securely.

5.Wipe off any spilled oil from snow thrower and engine.

6.Install left wheel (if removed for draining oil). Be sure to install klik pin into proper hole in wheel axle (See “TO REMOVE WHEELS” in the Service and Adjustments section of this manual).

7.Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine.

8.Refill engine with oil through oil dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS” section of this manual.

9.Use gauge on oil fill cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at “FULL” line on dipstick.

10.Wipe off any spilled oil.

MUFFLER

Inspect and replace corroded muffler as it could create a fire hazard and/or damage.

SPARK PLUG

Replace spark plug at the beginning of each season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in the “PRODUCT SPECIFICATIONS” section of this manual.

CLEANING

IMPORTANT: For best performance, keep snow thrower housing free of any dirt or trash. Clean the outside of your snow thrower after each use.

WARNING: Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

•Keep finished surfaces/wheels free of gasoline, oil, etc.

•We do not recommend using a garden hose to clean your snow thrower unless the electrical system, muffler and carburetor are covered to keep water out. Water in engine can result in shortened engine life..

14

Page 13 Page 15
Page 14
Image 14
Poulan PR624, 437986, 96192004201 owner manual Engine, Cleaning
Page 13 Page 15

PR624, 437986, 96192004201 specifications

The Poulan 96192004201,437986,PR624 is a versatile and powerful snow thrower designed for efficient snow removal during harsh winter conditions. This model stands out due to its robust features and cutting-edge technologies, making it a popular choice among homeowners and professionals alike.

One of the key features of the PR624 is its powerful 24-inch clearing width, which allows users to tackle large areas of snow effectively. The machine's heavy-duty auger system is engineered to break through dense, compacted snow, ensuring that even the toughest winter storms can be managed with ease. The adjustable chute is another significant attribute, enabling users to direct the discharged snow exactly where they want, whether onto driveways, sidewalks, or lawns.

Equipped with a reliable, high-performance engine, the PR624 offers impressive start-up capabilities and smooth operation. This snow thrower is designed to handle a variety of snow types, from light flurries to heavy, wet snow, making it a versatile tool for various winter conditions. The engine’s efficiency enhances its performance while reducing fuel consumption, contributing to both cost savings and environmental benefits.

The PR624 features a user-friendly control panel, allowing for simple adjustments and operations even in challenging weather conditions. Its ergonomic handles provide comfort during extended use, reducing fatigue for the operator. Furthermore, the intuitive gear shift options facilitate seamless transitions between different speeds, ensuring optimal maneuverability on driveways or walkways.

Safety is a top priority in the design of the Poulan 96192004201,437986,PR624. It is equipped with several safety features, including an emergency shut-off mechanism, that provides peace of mind during operation. The durable construction materials and thoughtful design also make this snow thrower capable of withstanding harsh winter elements, ensuring longevity and reliability over the years.

Overall, the Poulan 96192004201,437986,PR624 snow thrower is an excellent investment for anyone needing an efficient and reliable way to manage snow accumulation during the winter months. Its combination of power, ease of use, and thoughtful design makes it a standout choice in the realm of snow removal equipment.