OPERATION

TO START ENGINE

•Be sure fuel shut-off valve is in the “OPEN” position. Your snow thrower engine is equipped with a recoil starter.

COLD START

1.Insert safety ignition key (tied to recoil start cord) into ignition slot until it clicks. DO NOT turn the key. Keep the extra safety ignition key in a safe place.

2.Place ON / OFF switch in “ON” position.

3.Rotate choke control to “FULL” position.

4.Push the primer four (4) times if the temperature is below 15°F, or two (2) times if temperature is between 15° and 50°F. If temperature is above 50°F, priming is not necessary.

NOTE: Over priming may cause flooding, preventing the engine from starting. If you do flood the engine, wait a few minutes before attempting to start and DO NOT push the primer.

5.Pull recoil starter handle quickly. Do not allow starter rope to snap back.

6.When the engine starts, release the recoil starter handle and slowly move the choke control to the “OFF” posi- tion.

Allow the engine to warm up for a few minutes. Engine will not develop full power until it has reached normal operat- ing temperature.

WARM START

Follow the steps above, keeping the choke in the “OFF” position. DO NOT push the primer.

BEFORE STOPPING

Run the engine for a few minutes to help dry off any mois- ture on the engine.

IF RECOIL STARTER HAS FROZEN

If the recoil starter has frozen and will not turn the engine, proceed as follows:

1.Grasp the recoil starter handle and slowly pull as much rope out of the starter as possible.

2.Release the recoil starter handle and let it snap back against the starter.

If the engine still fails to start, repeat the above steps.

SNOW THROWING TIPS

•Go slower in deep, freezing or heavy wet snow. Use the drive speed control, NOT the ON / OFF switch, to adjust speed.

•It is easier and more efficient to remove snow imme- diately after it falls.

•The best time to remove snow is the early morning. At this time the snow is usually dry and has not been ex- posed to the direct sun and warming temperatures.

•Slightly overlap each successive path to ensure all snow will be removed.

•Throw snow downwind whenever possible.

•Adjust the skid plates to proper height for current snow conditions. See “TO ADJUST SKID PLATES” in this section of this manual.

•For extremely heavy snow, reduce the width of snow removal by overlapping previous path and moving slowly.

•Keep engine clean and clear of snow during use. This will help air flow and extend engine life.

•After snow-throwing is completed, allow engine to run for a few minutes to melt snow and ice off the engine.

•Clean the entire snow thrower thoroughly after each use and wipe dry so it is ready for next use.

WARNING: Do not operate snow thrower if weather conditions impair visibility. Throwing snow during a heavy, windy snowstorm can blind you and be hazardous to the safe operation of the snow thrower.

12

Page 11 Page 13
Page 12
Image 12
Poulan 437986, 96192004201, PR624 Snow Throwing Tips, To Start Engine, Before Stopping, If Recoil Starter has Frozen
Page 11 Page 13

PR624, 437986, 96192004201 specifications

The Poulan 96192004201,437986,PR624 is a versatile and powerful snow thrower designed for efficient snow removal during harsh winter conditions. This model stands out due to its robust features and cutting-edge technologies, making it a popular choice among homeowners and professionals alike.

One of the key features of the PR624 is its powerful 24-inch clearing width, which allows users to tackle large areas of snow effectively. The machine's heavy-duty auger system is engineered to break through dense, compacted snow, ensuring that even the toughest winter storms can be managed with ease. The adjustable chute is another significant attribute, enabling users to direct the discharged snow exactly where they want, whether onto driveways, sidewalks, or lawns.

Equipped with a reliable, high-performance engine, the PR624 offers impressive start-up capabilities and smooth operation. This snow thrower is designed to handle a variety of snow types, from light flurries to heavy, wet snow, making it a versatile tool for various winter conditions. The engine’s efficiency enhances its performance while reducing fuel consumption, contributing to both cost savings and environmental benefits.

The PR624 features a user-friendly control panel, allowing for simple adjustments and operations even in challenging weather conditions. Its ergonomic handles provide comfort during extended use, reducing fatigue for the operator. Furthermore, the intuitive gear shift options facilitate seamless transitions between different speeds, ensuring optimal maneuverability on driveways or walkways.

Safety is a top priority in the design of the Poulan 96192004201,437986,PR624. It is equipped with several safety features, including an emergency shut-off mechanism, that provides peace of mind during operation. The durable construction materials and thoughtful design also make this snow thrower capable of withstanding harsh winter elements, ensuring longevity and reliability over the years.

Overall, the Poulan 96192004201,437986,PR624 snow thrower is an excellent investment for anyone needing an efficient and reliable way to manage snow accumulation during the winter months. Its combination of power, ease of use, and thoughtful design makes it a standout choice in the realm of snow removal equipment.
Top Page Image Contents