English
Standard CMOS Features |
|
|
| |||
|
| CMOS Setup |
| |||
|
|
| Standard CMOS Features |
|
| |
| Date (mm:dd:yy) | Fri, Mar | 18 2007 | Item Help | ||
| Time (hh:mm:ss) | 18:25:04 |
| Menu Level` | ||
` IDE Channel 0 Master | [None] |
|
|
| ||
` IDE Channel 0 Slave | [None] |
|
|
| ||
` IDE Channel 2 Master | [None] |
|
|
| ||
` IDE Channel 2 Slave | [None] |
|
|
| ||
` IDE Channel 3 Master | [None] |
|
|
| ||
` IDE Channel 3 Slave | [None] |
|
|
| ||
| Drive A |
| [1.44M, 3.5"] |
|
| |
| Floppy 3 Mode Support | [Disabled] |
|
| ||
| Halt On |
| [All, But Keyboard] |
|
| |
| Base Memory |
| 640K |
|
|
|
| Extended Memory | 511M |
|
|
| |
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
| F5: Previous Values | F6: |
| F7: Optimized Defaults | ||
|
|
|
|
|
|
|
| Date |
|
|
|
|
|
| The date format is <week>, <month>, <day>, <year>. |
|
| |||
| Week | The week, from Sun to Sat, determined by the BIOS and is | ||||
| Month | The month, Jan. Through Dec |
|
|
| |
| Day | The day, from 1 to 31 (or the maximum allowed in the month) |
| |||
| Year | The year, from 1999 through 2099. |
|
| ||
Time
The times format in <hour> <minute> <second>. The time is calculated base on the
IDE Channel 0 Master/Slave
IDE HDD
Press "Enter" to select this option for automatic device detection.
IDE Channel 0 Master/Slave | IDE/SATA Device Setup. You can use one of three methods: | |
Auto | Allows BIOS to automatically detect IDE/SATA devices during POST(default) | |
None | Select this if no IDE/SATA devices are used and the system will skip the | |
| automatic detection step and allow for faster system start up. | |
Manual | User can manually input the correct settings | |
Access Mode | Use this to set the access mode for the hard drive. The four options are: | |
| CHS/LBA/Large/Auto(default:Auto) | |
IDE Channel 2, 3 Master/Slave
IDE
Press "Enter" to select this option for automatic device detection.
Extended IDE Drive. IDE/SATA Device Setup. You can use one of the two methods:
Auto | Allows BIOS to automatically detect IDE/SATA devices during POST(default) | |
None | Select this if no IDE/SATA devices are used and the system will skip the | |
| automatic detection step and allow for faster system start up. | |
- 32 - | ||
