USB 2.0 Controller
Disable this function if you are not using onboard USB 2.0 feature.
Enabled | Enable USB 2.0 Controller. (Default value) |
Disabled | Disable USB 2.0 Controller. |
USB Keyboard Support |
|
Enabled | Enable USB Keyboard Support. |
Disabled | Disable USB Keyboard Support. (Default value) |
USB Mouse Support |
|
Enabled | Enable USB Mouse Support. |
Disabled | Disable USB Mouse Support. (Default value) |
Legacy USB storage detect
This option allows users to decide whether to detect USB storage devices, including USB flash drives and USB hard drives during POST.
Enabled | BIOS will scan all USB storage devices. (Default value) |
Disabled | Disable this function. |
Azalia Codec |
|
Auto | Auto detect Azalia audio function. (Default value) |
Disabled | Disable Azalia audio function. |
Onboard H/W LAN |
|
Enabled | Enable Onboard H/W LAN function. (Default value) |
Disabled | Disable this function. |
SMART LAN (LAN Cable Diagnostic Function)
CMOS Setup
SMART LAN
Start detecting at Port |
|
|
|
|
| Item Help | |||
= | Open | / | Length | = | 0.0m |
| Menu Level` | ||
= | Open | / | Length | = | 0.0m |
|
|
| |
= | Open | / | Length | = | 0.0m |
|
|
| |
= | Open | / | Length | = | 0.0m |
|
|
| |
KLJI: Move | Enter: Select |
| F10: Save | ESC: Exit | F1: General Help | ||||
F5: Previous Values |
| F6: |
| F7: Optimized Defaults | |||||
This motherboard incorporates cable diagnostic feature designed to detect the status of the attached LAN cable. This feature will detect cabling issue and report the approximate distance to the fault or short. Refer to the following information for diagnosing your LAN cable:
When No LAN Cable Is Attached...
If no LAN cable is attached to the motherboard, the Status fields of all four pairs of wires will show Open and the Length fields show 0.0m, as shown in the figure above.
English
- 37 - | BIOS Setup |
