SWatch for logs with a compression side to prevent the saw from pinching. See il- lustration above for cutting logs with a compression side.

BUCKING USING A LOG OR SUPPORT STAND

S Remember your first cut is always on the compression side of the log. (Refer to the illustration below for your first and second cut)

S Your first cut should extend 1/3 of the diameter of the log.

SFinish with your second cut.

Using a log for support

2nd Cut

1st Cut

1st Cut

2nd Cut

Using a support stand

2nd Cut

1st Cut

1st Cut

2nd Cut

which can cause you to lose your bal- ance or control of the saw.

IMPORTANT POINTS

SWatch out for spring poles. Spring poles are small size limbs which can whip to- ward you or pull you off balance. Use extreme caution when cutting small size

limbs.

S Be alert for spring back from any branches that are bent or under pres- sure. Avoid being struck by the branch or the saw when the tension in the wood fibers is released.

S Frequently clear branches out of the way to avoid tripping over them.

LIMBING

SLimb a tree only after it is cut down.

S Leave the larger limbs underneath the felled tree to support the tree as you work.

S Start at the base of the felled tree and work toward the top, cutting branches and limbs. Remove small limbs with one cut.

SKeep tree between you and the chain. S Remove larger branches with the cut- ting techniques described BUCKING

WITHOUT A SUPPORT.

S Always use an overcut to cut small and freely hanging limbs. Undercutting could cause limbs to fall and pinch the saw.

PRUNING

WARNING: Limit pruning to limbs shoulder height or below. Do not cut if branches are higher than your shoulder. Get a professional to do the job.

S Make your first cut 1/3 of the way through the bottom of the limb. This cut will make the limb sag so that it falls easily on the second cut.

S Next make a second cut all the way

through the limb.

SFinish the pruning operation by using an overcut so that the stump of the limb protrudes 1 to 2 inches (3--5 cm) from the trunk of the tree.

LIMBING AND PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the mov- ing chain to contact any other branches or objects at the nose of the guide bar when limbing or pruning. Allowing such contact can result in serious injury.

WARNING: Never climb into a tree to limb or prune. Do not stand on lad- ders, platforms, a log, or in any position

11

Second cut

First cut 1/3 of way

3rd cut 1 to 2 in. (3--5 cm) from trunk of tree

Page 11
Image 11
Poulan 545186756 instruction manual Bucking Using a LOG or Support Stand, Through the limb, Limbing and Pruning

545186756 specifications

The Poulan 545186756 is a versatile chainsaw designed for both amateur woodworkers and seasoned professionals. Renowned for its reliability and robust performance, this chainsaw is crafted to handle a variety of cutting tasks ranging from trimming branches to felling small trees.

One of the standout features of the Poulan 545186756 is its powerful engine. Equipped with a 50cc, 2-stroke engine, this chainsaw delivers impressive cutting power. The engine is designed to provide optimal torque while maintaining fuel efficiency, which means users can work longer without frequent refueling. This perfect balance of power and efficiency makes it an ideal choice for homeowners and landscapers alike.

Furthermore, the Poulan 545186756 incorporates advanced technologies that enhance its usability. The chainsaw features an automatic oiling system, which ensures smooth chain operation and prolongs the life of the cutting equipment. This system automatically delivers oil to the chain as needed, reducing the maintenance required by the user. The tool-free chain tensioning system is another user-friendly feature, allowing for quick adjustments without the need for additional tools, enabling users to get back to work in minutes.

When it comes to safety, the Poulan 545186756 has multiple protective features. This includes a chain brake that quickly halts chain movement in the event of kickback, ensuring user safety during operation. The ergonomically designed handle provides a comfortable grip and minimizes vibrations, which can reduce operator fatigue during long cutting sessions.

The 18-inch bar length strikes a perfect balance between maneuverability and cutting capacity, allowing users to tackle various sizes of wood with precision. This chainsaw also features heavy-duty construction, making it durable enough to withstand the rigors of regular use.

In summary, the Poulan 545186756 is a powerful and reliable chainsaw equipped with advanced features that cater to both novice and experienced users. Its efficient engine, user-friendly technologies, and safety features make it a top choice for anyone looking to take on outdoor projects with confidence and ease.