ASSEMBLY

HOW TO SET UP YOUR TRACTOR

INSTALL SEAT (See Fig. 2)

Adjust seat before tightening adjustment bolt.

•Remove adjustment bolt, lock washer and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjust- ment bolt, lockwasher and flat washer loosely. Do not tighten

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment bolt securely.

SEAT

SEAT PAN

SHOULDER

BOLT

FLAT WASHER

LOCK WASHER

ADJUSTMENT

BOLT

FIG. 2

CHECK BATTERY (See Fig. 3)

•Lift seat pan to raised position.

•If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in MAINTENANCE section of this manual for charging instructions).

SEAT PAN

LABEL

TERMINAL

TERMINAL

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Op- eration section for location and function of controls)

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place gearshift lever in neutral (N) position.

•Roll tractor forward off skid.

•Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Op- eration section for location and function of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been com- pleted.

•Check engine oil level and fill fuel tank with gasoline.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place gear shift lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine.After engine has started, move throttle control to idle position.

•Depress clutch/brake pedal into full “BRAKE” position and hold. Move gearshift lever to 1st gear.

•Slowly release clutch/brake pedal and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

•Turn ignition key to “OFF” position.

Continue with the instructions that follow.

7

Page 6 Page 8
Page 7
Image 7
Poulan 184210, 954569172 manual HOW to SET UP Your Tractor, Install Seat See Fig, Check Battery See Fig
Page 6 Page 8

954569172, 184210 specifications

The Poulan 184210,954569172 is a robust chainsaw designed for both professional and residential use. It delivers exceptional power and performance, making it a versatile choice for various cutting tasks. With a powerful engine, the chainsaw is capable of tackling jobs ranging from pruning trees to felling larger timber.

One of the main features of the Poulan 184210 is its reliable 42cc engine. This two-stroke engine provides ample power, ensuring smooth operation even under heavy loads. The chainsaw is equipped with a 16-inch guide bar, allowing for precise cuts and easy maneuverability. The inclusion of an automatic oiling system ensures that the chain remains lubricated during operation, helping to extend the lifespan of the chainsaw.

In terms of user-friendly technology, the Poulan 184210 boasts an easy-start mechanism. The innovative Priming System reduces resistance during starting, allowing users to get the chainsaw up and running with minimal effort. Additionally, the chainsaw comes with an anti-vibration system that significantly reduces user fatigue, making it comfortable to use for extended periods.

Safety is a priority with the Poulan 184210, as it features a chain brake that stops the chain in case of kickback, providing peace of mind during operation. The chainsaw also incorporates a throttle lockout, preventing accidental starts and enhancing overall safety.

The design of the Poulan 184210 includes ergonomic handles that offer a secure grip, which improves control and accuracy while cutting. The lightweight construction of the chainsaw further contributes to its ease of use, allowing users to navigate through different cutting scenarios without much strain.

Moreover, the Poulan 184210 is designed for easy maintenance. The tool-free chain tensioning system allows users to adjust the chain easily, ensuring optimal performance without the use of additional tools. This feature is particularly beneficial for users needing quick adjustments on the go.

In summary, the Poulan 184210,954569172 combines power, safety, and user-friendly features, making it an excellent choice for anyone needing a reliable chainsaw for their cutting activities. Its robust performance, advanced technologies, and thoughtful design ensure that it meets the demands of both professional and amateur users alike.
Top Page Image Contents