SERVICE AND ADJUSTMENTS

IDLER PULLEYS

MANDREL PULLEYS

FIG. 18

TO CHECK AND ADJUST BRAKE (See Fig. 19)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than fi ve (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

Depress clutch/brake pedal all the way down and en- gage parking brake.

Measure distance between brake operating arm and nut “A” on brake rod.

If distance is other than 1-1/2", loosen jam nut and turn nut “A” until distance becomes 1-1/2". Retighten jam nut against nut “A”.

Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than fi ve (5) feet in highest gear, further maintenance is necessary. Replace brake pads or contact a qualifi ed service center.

WITH PARKING BRAKE “ENGAGED”

1-1/2"

NUT “A”

JAM NUT

OPERATING ARM

TO REPLACE MOTION DRIVE BELT (See Fig. 20)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

Remove belt from stationary idler and clutching idler.

Remove belt downward from around engine pulley.

Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by defl ecting belt keep- ers.

Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

Carefully work new belt down between transaxle belt keepers and onto the input pulley.

Slide belt into the center span keeper.

Pull belt toward front of tractor and roll around the top groove of engine pulley.

Install belt through stationary idler and clutching idler.

Make sure belt is in all pulley grooves and inside all belt guides and keepers.

Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

ENGINE

PULLEY

CLUTCHING

IDLER

STATIONARY

IDLER

CENTER SPAN

KEEPER

TRANSAXLE

PULLEY

FIG. 20

FIG. 19

21

Page 21
Image 21
Poulan 96012004500 manual To Check and Adjust Brake See Fig, To Replace Motion Drive Belt See Fig, To Check Brake

96012004500 specifications

The Poulan 96012004500 is a robust and versatile outdoor power tool that has become a favorite among homeowners and professionals alike. Designed for efficiency and ease of use, this device embodies a blend of advanced technology and practical features, making it an essential addition to any landscaping or gardening toolkit.

One of the standout features of the Poulan 96012004500 is its powerful engine. Equipped with a reliable two-stroke engine, it provides ample power to tackle tough clearing and trimming tasks. The engine’s design emphasizes fuel efficiency, reducing the need for frequent refueling during prolonged use. This capability enhances productivity, allowing users to complete projects swiftly with fewer interruptions.

The design of the Poulan 96012004500 facilitates user comfort and control. It features an ergonomic handle that offers a secure grip, minimizing strain on the hands and reducing fatigue during extended use. Additionally, the lightweight construction of the device makes it easy to maneuver, allowing users to reach difficult areas without much effort.

Incorporating advanced technologies, the Poulan 96012004500 features a simplified starting system, which means less hassle for users when igniting the engine. This is particularly beneficial for those who may not be familiar with operating outdoor power equipment. Along with this, the air filtration system efficiently keeps dirt and debris from entering the engine, prolonging its life and maintaining optimal performance.

Another characteristic that sets this device apart is its versatility. The Poulan 96012004500 can handle a variety of tasks, including trimming hedges, clearing brush, and managing overgrown areas. This multifunctionality makes it a valuable tool for both residential and commercial applications.

Furthermore, the Poulan 96012004500 has been designed for safety. It includes features such as a protective guard that shields users from flying debris, enhancing safety during operation.

In conclusion, the Poulan 96012004500 is a well-engineered outdoor tool that combines power, efficiency, and user-friendly features. Its lightweight design, ergonomic handle, and advanced technologies make it an excellent choice for anyone looking to enhance their outdoor maintenance capabilities. Whether for tackling a simple garden task or managing a larger landscaping project, this device is equipped to meet the challenges head-on.