Tools Required for Assembly, Unpack Carton

ASSEMBLY

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(1) 1/2" wrench	Utility knife
(1) 3/4" wrench	Tire pressure gauge
Pliers

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).

TO REMOVE TRACTOR FROM CARTON

UNPACK CARTON

•Remove all accessible loose parts and parts cartons from carton.

•Cut along dotted lines on all four panels of carton. Remove end panels and lay side panels ﬂ at.

•Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL (See Fig. 1)

ASSEMBLE EXTENSION SHAFT AND BOOT

•Slide extension shaft onto lower steering shaft.

•Place tabs of steering boot over tab slots in dash and push down to secure.

INSTALL STEERING WHEEL

•Position front wheels of the tractor so they are pointing straight forward.

•Remove steering wheel adapter from steering wheel and slide adapter onto steering shaft extension.

•Position steering wheel so cross bars are horizontal (left to right) and slide inside boot and onto adapter.

•Assemble large ﬂ at washer, 5/16 lock washer, 5/16 hex bolt and tighten securely.

•Snap steering wheel insert into center of steering wheel.

•Remove protective materials from tractor hood and grill.

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR IS TO ROLL OFF SKID.

INSERT

5/16 HEX BOLT

5/16 LOCK WASHER

LARGE FLAT

WASHER

STEERING

WHEELSTEERING BOOT

TABS

ADAPTER

EXTENSION

SHAFT

LOWER

STEERING

SHAFT

TAB

SLOTS

FIG. 1

INSTALL SEAT (See Fig. 2)

Adjust seat before tightening adjustment bolt.

•Remove adjustment bolt, lock washer and ﬂ at washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjust- ment bolt, lockwasher and ﬂ at washer loosely. Do not tighten

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment bolt securely.

96012004500 specifications

The Poulan 96012004500 is a robust and versatile outdoor power tool that has become a favorite among homeowners and professionals alike. Designed for efficiency and ease of use, this device embodies a blend of advanced technology and practical features, making it an essential addition to any landscaping or gardening toolkit.

One of the standout features of the Poulan 96012004500 is its powerful engine. Equipped with a reliable two-stroke engine, it provides ample power to tackle tough clearing and trimming tasks. The engine’s design emphasizes fuel efficiency, reducing the need for frequent refueling during prolonged use. This capability enhances productivity, allowing users to complete projects swiftly with fewer interruptions.

The design of the Poulan 96012004500 facilitates user comfort and control. It features an ergonomic handle that offers a secure grip, minimizing strain on the hands and reducing fatigue during extended use. Additionally, the lightweight construction of the device makes it easy to maneuver, allowing users to reach difficult areas without much effort.

Incorporating advanced technologies, the Poulan 96012004500 features a simplified starting system, which means less hassle for users when igniting the engine. This is particularly beneficial for those who may not be familiar with operating outdoor power equipment. Along with this, the air filtration system efficiently keeps dirt and debris from entering the engine, prolonging its life and maintaining optimal performance.

Another characteristic that sets this device apart is its versatility. The Poulan 96012004500 can handle a variety of tasks, including trimming hedges, clearing brush, and managing overgrown areas. This multifunctionality makes it a valuable tool for both residential and commercial applications.

Furthermore, the Poulan 96012004500 has been designed for safety. It includes features such as a protective guard that shields users from flying debris, enhancing safety during operation.

In conclusion, the Poulan 96012004500 is a well-engineered outdoor tool that combines power, efficiency, and user-friendly features. Its lightweight design, ergonomic handle, and advanced technologies make it an excellent choice for anyone looking to enhance their outdoor maintenance capabilities. Whether for tackling a simple garden task or managing a larger landscaping project, this device is equipped to meet the challenges head-on.

Poulan 96012004500 Tools Required for Assembly, To Remove Tractor from Carton, Unpack Carton

Models: 96012004500