SERVICE AND ADJUSTMENTS

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure tires are properly infl ated (See “PRODUCT SPECIFICATIONS” section of this manual). If tires are over or underinfl ated, you will not properly adjust your mower.

SIDE-TO-SIDE ADJUSTMENT (See Figs. 14 and 15)

•Raise mower to its highest position.

•At the midpoint of both sides of mower, measure height from bottom edge of mower to ground. Distance “A” on both sides of mower should be the same or within 1/4" of each other.

•If adjustment is necessary, make adjustment on one side of mower only.

•To raise one side of mower, tighten lift link adjustment nut on that side.

•To lower one side of mower, loosen lift link adjustment nut on that side.

NOTE: Each full turn of adjustment nut will change mower height about 1/8".

•Recheck measurements after adjusting.

BOTTOM EDGE

 

BOTTOM EDGE

OF MOWER TO

 

OF MOWER TO

GROUND

 

GROUND

A

GROUND LINE

A

FIG. 14

SUSPENSION ARM

LIFT LINK

ADJUSTMENT NUT

FIG. 15

FRONT-TO-BACK ADJUSTMENT (See Figs. 16 and 17)

IMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE. IF THE FOLLOWING FRONT-TO-BACK ADJUSTMENT IS NECESSARY, BE SURE TO ADJUST BOTH FRONT LINKS EQUALLY SO MOWER WILL STAY LEVEL SIDE-TO-SIDE.

To obtain the best cutting results, the mower housing should be adjusted so that the front is approximately 1/8" to 1/2" lower than the rear when the mower is in its high- est position.

Check adjustment on right side of tractor. Measure distance “D” directly in front and behind the mandrel at bottom edge of mower housing as shown.

•Before making any necessary adjustments, check that both front links are equal in length.

•If links are not equal in length, adjust one link to same length as other link.

•To lower front of mower loosen nut “E” on both front links an equal number of turns.

•When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nuts “F” against trunnion on both front links.

•To raise front of mower, loosen nut “F” from trunnion on both front links. Tighten nut “E” on both front links an equal number of turns.The two front links must remain equal in length.

•When distance “D”is 1/8" to 1/2" lower at front than rear, tighten nut “F” against trunnion on both front links.

•Recheck side-to-side adjustment.

MANDREL

“D”

“D”

FIG. 16

BOTH FRONT LINKS MUST BE EQUAL IN LENGTH

NUT “F”

NUT “E”

TRUNNION

FRONT LINKS

FIG. 17

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 18)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

•Remove mower from tractor (See “TO REMOVE MOWER” in this section of this manual).

•Work belt off both mandrel pulleys and idler pulleys.

•Pull belt away from mower.

BELT INSTALLATION -

•Install new belt in reverse order of removal.

•Make sure belt is in all pulley grooves and inside all belt guides.

•Install mower in reverse order of removal instruc- tions.

20

Page 19 Page 21
Page 20
Image 20
Poulan 96012004500 To Level Mower Housing, To Replace Mower Blade Drive Belt See Fig, Belt Removal, Belt Installation
Page 19 Page 21

96012004500 specifications

The Poulan 96012004500 is a robust and versatile outdoor power tool that has become a favorite among homeowners and professionals alike. Designed for efficiency and ease of use, this device embodies a blend of advanced technology and practical features, making it an essential addition to any landscaping or gardening toolkit.

One of the standout features of the Poulan 96012004500 is its powerful engine. Equipped with a reliable two-stroke engine, it provides ample power to tackle tough clearing and trimming tasks. The engine’s design emphasizes fuel efficiency, reducing the need for frequent refueling during prolonged use. This capability enhances productivity, allowing users to complete projects swiftly with fewer interruptions.

The design of the Poulan 96012004500 facilitates user comfort and control. It features an ergonomic handle that offers a secure grip, minimizing strain on the hands and reducing fatigue during extended use. Additionally, the lightweight construction of the device makes it easy to maneuver, allowing users to reach difficult areas without much effort.

Incorporating advanced technologies, the Poulan 96012004500 features a simplified starting system, which means less hassle for users when igniting the engine. This is particularly beneficial for those who may not be familiar with operating outdoor power equipment. Along with this, the air filtration system efficiently keeps dirt and debris from entering the engine, prolonging its life and maintaining optimal performance.

Another characteristic that sets this device apart is its versatility. The Poulan 96012004500 can handle a variety of tasks, including trimming hedges, clearing brush, and managing overgrown areas. This multifunctionality makes it a valuable tool for both residential and commercial applications.

Furthermore, the Poulan 96012004500 has been designed for safety. It includes features such as a protective guard that shields users from flying debris, enhancing safety during operation.

In conclusion, the Poulan 96012004500 is a well-engineered outdoor tool that combines power, efficiency, and user-friendly features. Its lightweight design, ergonomic handle, and advanced technologies make it an excellent choice for anyone looking to enhance their outdoor maintenance capabilities. Whether for tackling a simple garden task or managing a larger landscaping project, this device is equipped to meet the challenges head-on.
Top Page Image Contents