SERVICE AND ADJUSTMENTS

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure tires are properly inflated (See “PRODUCT SPECIFICATIONS” section of this manual). If tires are over or underinflated, you will not properly adjust your mower.

SIDE-TO-SIDE ADJUSTMENT (See Figs. 13 and 14)

•Raise mower to its highest position.

•At the midpoint of both sides of mower, measure height from bottom edge of mower to ground. Distance “A” on both sides of mower should be the same or within 1/4" of each other.

•If adjustment is necessary, make adjustment on one side of mower only.

•To raise one side of mower, tighten lift link adjustment nut on that side.

•To lower one side of mower, loosen lift link adjustment nut on that side.

NOTE: Each full turn of adjustment nut will change mower height about 1/8".

•Recheck measurements after adjusting.

BOTTOM EDGE

 

BOTTOM EDGE

OF MOWER TO

 

OF MOWER TO

GROUND

 

GROUND

A

GROUND LINE

A

FIG. 13

SUSPENSION ARM

LIFT LINK

ADJUSTMENT NUT

FIG. 14

FRONT-TO-BACK ADJUSTMENT (See Figs. 15 and 16)

IMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE. IF THE FOLLOWING FRONT-TO-BACK ADJUSTMENT IS NECESSARY, BE SURE TO ADJUST BOTH FRONT LINKS EQUALLY SO MOWER WILL STAY LEVEL SIDE-TO-SIDE.

To obtain the best cutting results, the mower housing should be adjusted so that the front is approximately 1/8" to 1/2" lower than the rear when the mower is in its high- est position.

Check adjustment on right side of tractor. Measure distance “D” directly in front and behind the mandrel at bottom edge of mower housing as shown.

•Before making any necessary adjustments, check that both front links are equal in length.

•If links are not equal in length, adjust one link to same length as other link.

•To lower front of mower loosen nut “E” on both front links an equal number of turns.

•When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nuts “F” against trunnion on both front links.

•To raise front of mower, loosen nut “F” from trunnion on both front links. Tighten nut “E” on both front links an equal number of turns. The two front links must remain equal in length.

•When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nut “F” against trunnion on both front links.

•Recheck side-to-side adjustment.

MANDREL

“D”

“D”

FIG. 15

BOTH FRONT LINKS MUST BE EQUAL IN LENGTH

NUT “F”

NUT “E”

TRUNNION

FRONT LINKS

FIG. 16

20

Page 19 Page 21
Page 20
Image 20
Poulan 96012008800, 425182 manual To Level Mower Housing, FRONT-TO-BACK Adjustment See Figs
Page 19 Page 21

96012008800, 425182 specifications

The Poulan 425182,96012008800 is a highly regarded handheld leaf blower that serves the needs of both homeowners and professionals seeking efficient yard cleanup solutions. Known for its lightweight design and user-friendly features, this leaf blower is designed to make yard work less of a chore while enhancing productivity.

One of the standout features of the Poulan 425182 is its powerful engine. Equipped with a robust 25cc two-stroke engine, it delivers impressive airflow and speed, allowing users to tackle even the most stubborn leaves and debris with ease. The engine is designed for efficient fuel consumption, which means longer run times and less frequent refueling, a crucial factor for those tackling larger yards or extended jobs.

The ergonomic design of the Poulan 425182 means that it is comfortable to hold and operate for extended periods. Weighing in at just under ten pounds, it reduces user fatigue and allows for better maneuverability while working. This is particularly beneficial for those looking to clear large areas or navigate around obstacles like flower beds, trees, and outdoor furniture.

Another significant aspect of the Poulan 425182 is its variable speed control. This feature enables users to adjust the blower's power to suit the specific job at hand, whether it's light debris around flower beds or heavy leaf accumulation in corners of the yard. The variable speed not only enhances efficiency but also contributes to more precise cleaning.

The blower also incorporates a convenient cruise control feature that allows users to maintain a consistent airflow without needing to keep their finger on the throttle trigger. This adds to user comfort and provides a more enjoyable experience during lengthy tasks.

In terms of maintenance, the Poulan 425182 offers easy access to air filters and spark plugs, making it simpler to perform routine checks and ensure optimal performance. The two-stroke engine simplifies fuel mixing, and the reduced emissions technology helps to minimize environmental impact while still delivering the power needed for effective yard care.

In summary, the Poulan 425182,96012008800 leaf blower is a reliable tool that combines power, efficiency, and ease of use. Its lightweight design, ergonomic features, variable speed control, and low emissions technology make it a top choice for anyone looking to maintain their outdoor spaces effortlessly. For versatile and effective yard cleanup, this leaf blower stands out in the competitive market of outdoor power equipment.
Top Page Image Contents