SAFETY RULES

Safe Operation Practices for Walk-Behind Powered Rotary Tillers

TRAINING

Read the Owner’s Manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

Keep the area of operation clear of all persons, par- ticularly small children, and pets.

PREPARATION

Thoroughly inspect the area where the equipment is to be used and remove all foreign objects.

Disengage all clutches and shift into neutral before starting the engine (motor).

Do not operate the equipment without wearing ade- quate outer garments. Wear footwear that will improve footing on slippery surfaces.

Handle fuel with care; it is highly flammable.

Use an approved fuel container.

Never add fuel to a running engine or hot engine.

Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

Replace gasoline cap securely and clean up spilled fuel before restarting.

Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

Never attempt to make any adjustments while the engine (motor) is running (except where specifically recommended by manufacturer).

OPERATION

Do not put hands or feet near or under rotating parts.

Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, thoroughly inspect the tiller for any damage, and repair the damage before restarting and operating the tiller.

Exercise caution to avoid slipping or falling.

If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

Stop the engine (motor) when leaving the operating position.

Take all possible precautions when leaving the machine unattended. Disengage the tines, shift into neutral, and stop the engine.

Keep children and pets away.

Do not overload the machine capacity by attempting to till too deep at too fast a rate.

Never operate the machine at high speeds on slippery surfaces. Look behind and use care when backing.

Never allow bystanders near the unit.

Use only attachments and accessories approved by the manufacturer of the tiller.

Never operate the tiller without good visibility or light.

Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward. If this occurs, let go of the handlebars and do not restrain the machine.

MAINTENANCE AND STORAGE

Keep machine, attachments, and accessories in safe working condition.

Check shear pins, engine mounting bolts, and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure.

Always refer to the operator’s guide instructions for important details if the tiller is to be stored for an ex- tended period.

- IMPORTANT -

CAUTIONS, IMPORTANTS, AND NOTES ARE A MEANS OF ATTRACTING ATTENTION TO IMPORTANT OR CRITICAL INFORMATION IN THIS MANUAL.

IMPORTANT: USED TO ALERT YOU THAT THERE IS A POSSIBILITY OF DAMAGING THIS EQUIPMENT.

NOTE: Gives essential information that will aid you to better understand, incorporate, or execute a particular set of instructions.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

CAUTION: Always disconnect spark plug wire and place wire where it can- not contact spark plug in order to pre- vent accidental starting when setting up, transporting, adjusting or making repairs.

Before cleaning, repairing, or inspecting, shut off the engine and make certain all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting.Disconnect the cord on electric motors.

Do not run the engine indoors; exhaust fumes are dangerous.

Never operate the tiller without proper guards, plates, or other safety protective devices in place.

WARNING

The engine exhaust from this product con- tains chemicals known to the State of Cali- fornia to cause cancer, birth defects, or other reproductive harm.

2

Page 2
Image 2
Poulan AGF550A owner manual Safety Rules, Training, Preparation, Operation, Maintenance and Storage

AGF550A specifications

The Poulan AGF550A is a versatile and efficient gas-powered string trimmer designed to tackle a variety of lawn care needs. With its robust engine and user-friendly features, it offers gardeners and landscapers the perfect blend of power and convenience for maintaining their outdoor spaces.

At the heart of the AGF550A is a reliable 25cc two-cycle engine that delivers ample power while ensuring that the trimmer remains lightweight and easy to maneuver. This makes it an ideal choice for both professional landscapers and homeowners looking to maintain their lawns. Its performance capability allows users to cut through dense grass and weeds with ease, significantly reducing the time spent on yard maintenance.

One of the standout features of the Poulan AGF550A is its Easy Start technology, which makes starting the trimmer hassle-free. The engineered system minimizes the effort required to pull the starting cord, ensuring that users can get to work quickly without struggling to start the machine. This feature is particularly beneficial for those who may not have much experience operating gas-powered equipment.

The trimmer is equipped with a 16-inch cutting swath, providing a wide coverage area that allows for efficient trimming of larger sections of grass or weeds. This design helps minimize the number of passes required to achieve a well-manicured appearance, ultimately saving users time and effort. Additionally, the dual-line feed system ensures that the trimmer line is advanced smoothly, allowing for uninterrupted operation.

Comfort is a key consideration in the design of the AGF550A, featuring an adjustable handle that accommodates various user heights and preferences. The trimmer's lightweight design further enhances comfort, reducing fatigue during extended use. The balanced weight distribution allows for easier handling, ensuring that users can maintain control while maneuvering around obstacles like trees and flower beds.

Another notable characteristic of the Poulan AGF550A is its trimmer head, which is designed for easy line replacement. Users can quickly reload the line without needing additional tools, allowing for more seamless transitions between tasks. This efficiency is particularly useful for those who need to frequently adjust the line during a trimming session.

Overall, the Poulan AGF550A string trimmer is a reliable choice for anyone looking for a powerful, user-friendly lawn maintenance tool. Its combination of a strong engine, innovative starting technology, and comfort-focused design make it an excellent addition to any gardener's toolkit. Whether you are trimming edges or tackling tough overgrowth, the AGF550A delivers the performance you need to achieve a pristine lawn.