ASSEMBLY INFORMATION - TRIMMER HEAD

TRIMMER

HEAD

NOTE: Remove the blade and metal shield before attaching the plastic shield and trim- mer head. To remove blade, push in locking lever and hold. Rotate blade nut until the lock- ing lever falls into one of the grooves in the dust cup. Continue to hold the locking lever. This will keep the shaft from turning while loosening the blade nut. Remove blade nut by turning clockwise. Release locking lever. Remove both washers and blade. To remove metal shield, loosen and remove the four mounting screws. See ATTACHING THE METAL SHIELD and INSTALLING THE METAL BLADE for illustrations. Be sure to store all parts and instructions for future use.

ATTACHING THE PLASTIC SHIELD AND TRIMMER HEAD

NOTE: Make sure all parts are properly installed as shown in the illustration before installing the trimmer head.

SPush in locking lever and hold.

SRotate dust cup until the locking lever falls into one of the grooves.

Locking Lever

SContinue to hold in locking lever. This will keep the shaft from turning while tightening the trimmer head.

SThread trimmer head onto the shaft in the

direction shown on the decal. Tighten until secure.

SRelease locking lever.

ASSEMBLY INFORMATION - WEED BLADE

WEED

BLADE

WARNING: The shield must be prop- erly installed. The shield provides partial protection from the risk of thrown objects to the operator and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you.

SRemove wing nut from shield.

SInsert bracket into slot on shield.

SPivot shield until bolt passes through hole in

bracket.

STighten the wing nut securely.

S If your unit has a plastic cover over the threads on the threaded shaft, remove the covering to expose the threads.

S Before installing the trimmer head, make sure the dust cup is positioned on the gear- box as shown below.

 

Bracket

Slot

Wing Nut

 

Shield Gearbox

Dust Cup

5

NOTE: Remove the trimmer head and plastic shield before attaching the metal shield and installing the weed blade. To remove the trim- mer head, push in locking lever and hold. Ro- tate trimmer head until the locking lever falls into one of the grooves in the dust cup. Continue to hold in locking lever. This will keep the shaft from turning while loosening the trimmer head. Remove trimmer head by turning clockwise. Release locking lever. To remove the plastic shield, loosen and remove wing nut. Pivot shield to release bracket from slot. See AT-

TACHING THE PLASTIC SHIELD AND TRIM- ER HEAD for illustrations. Be sure to store all parts and instructions for future use. Never use the trimmer head with the metal blade installed.

ATTACHING THE METAL SHIELD

DANGER: The metal shield must be properly installed on the tool anytime the tool is used with the blade. The forward tip of the metal shield helps to reduce the occurrence of blade thrust which can cause serious injury such as amputation to the operator or by- standers. Failure to install the shield in the position shown can result in serious injury to the operator. The length of the shield must be aligned with the length of the tube. The blade is sharp and can cut you. Be sure to wear gloves while working with blades.

S If your unit has a plastic cover over the threads on the shaft, remove the covering to expose the threads.

Page 4 Page 6
Page 5
Image 5
Poulan BC2400P manual Assembly Information Trimmer Head, Attaching the Plastic Shield and Trimmer Head
Page 4 Page 6

BC2400P specifications

The Poulan BC2400P is a robust and versatile string trimmer designed for both residential and professional use. One of its standout features is the powerful 2-cycle engine that delivers high performance and efficiency. With a displacement of 24 cc, this engine provides ample power to tackle dense grass and tough weeds, making it suitable for a variety of landscaping tasks.

Equipped with a straight shaft, the BC2400P offers an extended reach that allows users to easily trim under bushes and around obstacles without straining their backs. The straight shaft design also enhances precision, making it ideal for edge trimming along walkways and flower beds. This trimmer includes a dual line spool, which enables users to load two cutting lines simultaneously for a wider cutting path and faster trimming, ensuring a clean and efficient cut every time.

The Poulan BC2400P features an innovative Easy Start system, which reduces the pull resistance when starting the engine. This technology significantly minimizes the effort required to get the trimmer up and running, making it user-friendly even for those who may not have experience with two-stroke engines. Additionally, the engine is designed to run on a fuel mix that is environmentally friendly, producing fewer emissions compared to traditional gas-powered models.

Another notable characteristic of the BC2400P is its lightweight construction. Weighing in at just over 10 pounds, it allows for extended use without causing fatigue, making it an excellent choice for homeowners and professionals alike. The ergonomic handle design contributes to overall comfort, ensuring that users can maintain control and reduce vibration during operation.

Built for durability, the BC2400P features a robust housing that protects the internal components from wear and tear, extending its lifespan. Regular maintenance is straightforward, with easily accessible parts that simplify cleaning and servicing.

In summary, the Poulan BC2400P offers a powerful performance paired with user-friendly features, making it an outstanding choice for anyone in need of a reliable string trimmer. Its combination of advanced technologies, such as the Easy Start and dual line spool, along with its lightweight and ergonomic design, ensure efficiency and comfort for a wide range of trimming tasks. Whether you are maintaining a residential yard or taking on professional landscaping projects, the BC2400P stands out as a valuable tool in your outdoor equipment arsenal.
Top Page Image Contents