STORAGE

Immediately prepare your tiller for storage at the end of the season or if the unit will not be used for 30 days or more.

WARNING: Never store the tiller with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TILLER

Clean entire tiller (See “CLEANING” in the Maintenance section of this manual).

Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

Lubricate as shown in the Maintenance section of this manual.

Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

Touch up all rusted or chipped paint surfaces; sand lightly before painting.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS THE CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

Empty the fuel tank by starting the engine and let it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent.

Use fresh fuel next season.

NOTE: Fuel stablizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stablizer container. Run engine at least 10 minutes after adding stablizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

Remove spark plug.

Pour 1 ounce (29 ml) of oil through spark plug hole into cylinder.

Pull starter handle slowly several times to distribute oil.

Replace with new spark plug.

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your unit indoors and cover it to give protection from dust and dirt.

Cover your unit with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your unit to rust.

IMPORTANT: NEVER COVER TILLER WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

15

Page 15
Image 15
Poulan FT825 manual Storage, Other, Fuel System, Engine OIL, Cylinders

FT825 specifications

The Poulan FT825 is a robust and reliable tiller designed for homeowners and gardening enthusiasts who require a powerful tool for soil preparation. With a focus on durability and ease of use, the FT825 is engineered to make tilling tasks simpler and more efficient.

One of the main features of the Poulan FT825 is its 208cc four-stroke engine. This powerful engine delivers ample torque and performance, allowing for efficient tilling in various soil types. The four-stroke design ensures that the engine runs smoothly while maintaining lower emissions, making it an environmentally friendly choice.

The tiller features a durable steel frame that provides stability and support during operation. The frame is designed to withstand the rigors of heavy use, ensuring longevity and reliability over the years. Additionally, the FT825 comes with adjustable tilling width and depth settings, allowing users to customize their tilling experience based on specific gardening needs. The tilling width can be adjusted from 11 inches to 22 inches, making it versatile for different tasks.

Equipped with a set of rugged, spiral-tined tines, the FT825 can penetrate hard soil effortlessly, breaking up compacted earth for easier planting. These heavy-duty tines are designed to withstand tough conditions while providing exceptional soil mixing capabilities.

The Poulan FT825 also features ergonomic handles that are adjustable for user comfort. This design minimizes strain while tilling, enabling longer operation without discomfort. The integrated anti-vibration system further enhances user comfort by reducing the vibrations transmitted to the operator's hands.

Another notable technology is the easy-start system, which ensures that the engine starts with minimal effort. This is particularly beneficial for novice users who may struggle with traditional pull-start mechanisms.

For transport and storage, the FT825 is designed with foldable handlebars, which reduces its footprint and makes it easier to maneuver in tight spaces. This feature also simplifies the storage process, ensuring that the tiller can be conveniently stored when not in use.

In summary, the Poulan FT825 is a feature-rich tiller that combines power, durability, and user-friendly designs. With its robust engine, adjustable settings, and thoughtful technologies, it is an ideal choice for anyone looking to cultivate their garden effectively.