SAFETY RULES

Safe Operation Practices for Walk-Behind Powered Rotary Tillers

TRAINING

Read the Owner’s Manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

Keep the area of operation clear of all persons, par- ticularly small children, and pets.

PREPARATION

Thoroughly inspect the area where the equipment is to be used and remove all foreign objects.

Disengage all clutches and shift into neutral before starting the engine (motor).

Do not operate the equipment without wearing ade- quate outer garments. Wear footwear that will improve footing on slippery surfaces.

Handle fuel with care; it is highly flammable.

Use an approved fuel container.

Never add fuel to a running engine or hot engine.

Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

Replace gasoline cap securely and clean up spilled fuel before restarting.

Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

Never attempt to make any adjustments while the engine (motor) is running (except where specifically recommended by manufacturer).

OPERATION

Do not put hands or feet near or under rotating parts.

Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, thoroughly inspect the tiller for any damage, and repair the damage before restarting and operating the tiller.

Exercise caution to avoid slipping or falling.

If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

Stop the engine (motor) when leaving the operating position.

Take all possible precautions when leaving the machine unattended. Disengage the tines, shift into neutral, and stop the engine.

Before cleaning, repairing, or inspecting, shut off the engine and make certain all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting. Disconnect the cord on electric motors.

Do not run the engine indoors; exhaust fumes are dangerous.

Never operate the tiller without proper guards, plates, or other safety protective devices in place.

Keep children and pets away.

Do not overload the machine capacity by attempting to till too deep at too fast a rate.

Never operate the machine at high speeds on slippery surfaces. Look behind and use care when backing.

Never allow bystanders near the unit.

Use only attachments and accessories approved by the manufacturer of the tiller.

Never operate the tiller without good visibility or light.

Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward. If this occurs, let go of the handlebars and do not restrain the machine.

MAINTENANCE AND STORAGE

Keep machine, attachments, and accessories in safe working condition.

Check shear pins, engine mounting bolts, and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure.

Always refer to the operator’s guide instructions for important details if the tiller is to be stored for an ex- tended period.

- IMPORTANT -

CAUTIONS, IMPORTANTS, AND NOTES ARE A MEANS OF ATTRACTING ATTENTION TO IMPORTANT OR CRITICAL INFORMATION IN THIS MANUAL.

IMPORTANT: USED TO ALERT YOU THAT THERE IS A POSSIBILITY OF DAMAGING THIS EQUIPMENT.

NOTE: Gives essential information that will aid you to better understand, incorporate, or execute a particular set of instructions.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

CAUTION: Always disconnect spark plug wire and place wire where it can- not contact spark plug in order to pre- vent accidental starting when setting up, transporting, adjusting or making repairs.

WARNING

The engine exhaust from this product con- tains chemicals known to the State of Cali- fornia to cause cancer, birth defects, or other reproductive harm.

2

Page 2
Image 2
Poulan FT825 manual Safety Rules, Training, Preparation, Operation, Maintenance and Storage

FT825 specifications

The Poulan FT825 is a robust and reliable tiller designed for homeowners and gardening enthusiasts who require a powerful tool for soil preparation. With a focus on durability and ease of use, the FT825 is engineered to make tilling tasks simpler and more efficient.

One of the main features of the Poulan FT825 is its 208cc four-stroke engine. This powerful engine delivers ample torque and performance, allowing for efficient tilling in various soil types. The four-stroke design ensures that the engine runs smoothly while maintaining lower emissions, making it an environmentally friendly choice.

The tiller features a durable steel frame that provides stability and support during operation. The frame is designed to withstand the rigors of heavy use, ensuring longevity and reliability over the years. Additionally, the FT825 comes with adjustable tilling width and depth settings, allowing users to customize their tilling experience based on specific gardening needs. The tilling width can be adjusted from 11 inches to 22 inches, making it versatile for different tasks.

Equipped with a set of rugged, spiral-tined tines, the FT825 can penetrate hard soil effortlessly, breaking up compacted earth for easier planting. These heavy-duty tines are designed to withstand tough conditions while providing exceptional soil mixing capabilities.

The Poulan FT825 also features ergonomic handles that are adjustable for user comfort. This design minimizes strain while tilling, enabling longer operation without discomfort. The integrated anti-vibration system further enhances user comfort by reducing the vibrations transmitted to the operator's hands.

Another notable technology is the easy-start system, which ensures that the engine starts with minimal effort. This is particularly beneficial for novice users who may struggle with traditional pull-start mechanisms.

For transport and storage, the FT825 is designed with foldable handlebars, which reduces its footprint and makes it easier to maneuver in tight spaces. This feature also simplifies the storage process, ensuring that the tiller can be conveniently stored when not in use.

In summary, the Poulan FT825 is a feature-rich tiller that combines power, durability, and user-friendly designs. With its robust engine, adjustable settings, and thoughtful technologies, it is an ideal choice for anyone looking to cultivate their garden effectively.