STARTING A FLOODED ENGINE

Flooded engines can be started by placing the ON/OFF switch in the ON position and the choke lever in the OFF CHOKE position and engaging the throttle lock as directed in the STARTING A COLD ENGINE section; then,

pull the rope to clear the engine of excess fuel. Starting could require pulling the starter rope many times depending on how badly the unit is flooded. If the unit still doesn’t start, refer to the TROUBLESHOOTING TABLE or call 1-800-554-6723.

SERVICE

WARNING: Ensure ON/OFF switch is in the OFF position and disconnect the spark plug before performing maintenance except for carburetor adjustments.

GENERAL RECOMMENDATIONS

The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjust- ments will need to be made periodically to properly maintain your unit.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S ON/OFF Switch -- Ensure ON/OFF switch functions properly by moving the switch to the OFF position. Make sure engine stops; then restart engine and continue.

SFuel Tank -- Do not use unit if fuel tank shows signs of damage or leaks.

INSPECT AND CLEAN UNIT AND LABELS

S Before and after each use, inspect com- plete unit for loose or damaged parts. After each use, clean the unit and labels using a damp cloth with a mild detergent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

Air Filter

Cover

Air Filter

Screw

Cleaning the air filter:

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

SClean the cover and the area around it to keep debris from falling into the carburetor

chamber when the cover is removed.

SRemove parts as illustrated.

NOTE: Do not clean filter in gasoline or other flammable solvent. Doing so can create a fire hazard or produce harmful evaporative emis- sions.

SWash the filter in soap and water. S Allow filter to dry.

S Add a few drops of oil to the filter; squeeze filter to distribute oil.

S Replace parts.

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

As your unit is used, carbon deposits build up on the muffler and spark arresting screen and must be removed to avoid creating a fire haz- ard or affecting engine performance.

For normal homeowner use, the muffler and spark arresting screen will not require any service. After 50 hours of use, we recom- mend that your muffler be serviced or re- placed by an authorized service dealer.

CARBURETOR ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The blade will be moving during most of this procedure. Wear your protective equipment and observe all safety precautions. When making adjust- ments, use a screwdriver short enough to keep your hands behind the handguard and away from the blade. After making adjust- ments, the blade must not move at idle speed. The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

SEngine will not idle when the throttle is re- leased.

SThe blade moves at idle. Keep others away when making idle speed adjustments.

Make adjustments with the unit resting on a level surface free of debris that can be caught in the hedge trimmer blade. Serious injury to the operator and others can occur if the car- buretor is not properly adjusted. Keep all parts of your body away from the blade and muffler.

-- 6 --

Page 6
Image 6
Poulan GHT 225, GHT 195 instruction manual Service

GHT 195, GHT 225 specifications

The Poulan GHT 225 and GHT 195 are versatile, high-performance gas-powered hedge trimmers designed for homeowners and professional landscapers alike. Known for their durability, efficiency, and ease of use, these models are perfect for various trimming tasks, from shaping hedges to maintaining the aesthetic appeal of gardens.

One of the standout features of the GHT 225 and GHT 195 is their robust engines. The GHT 225 is equipped with a powerful 22cc engine, while the GHT 195 boasts a slightly smaller yet efficient 19cc engine. Both engines facilitate a combination of power and fuel efficiency, ensuring longer run times without sacrificing performance. This balance allows users to tackle larger areas without frequent stops for refueling.

In terms of cutting capability, both the GHT 225 and GHT 195 offer dual-action blades that significantly reduce vibration during operation. This technology not only enhances user comfort but also provides a cleaner cut, making it easier to maintain precise shapes and lines. The blade length varies between the two models, with the GHT 225 featuring a longer blade for broader applications, while the GHT 195's blade is ideal for smaller, more detailed work.

Another characteristic worth noting is the lightweight design of both trimmers. Weighing in at only a few pounds, these hedge trimmers minimize user fatigue, enabling longer periods of use without compromising comfort or effectiveness. The ergonomic handle design allows for fluctuations in grip positions, catering to various cutting angles and providing added maneuverability in tight spaces.

Safety features are also a vital aspect of the Poulan GHT series. Both models come with a built-in safety switch that prevents accidental starts. Additionally, the protective blade guard shields users from debris during operation, promoting a safer trimming experience.

Maintenance is straightforward with the Poulan GHT lineup. The easy-access air filter and spark plug enable users to perform routine maintenance without the need for specialized tools. This user-friendly approach ensures that the trimmers remain in peak working condition for years to come.

In conclusion, the Poulan GHT 225 and GHT 195 hedge trimmers are excellent choices for anyone looking to enhance their landscaping capabilities. With powerful engines, efficient cutting technology, lightweight design, and added safety features, these models stand out in the market for their reliability and performance, making them an ideal addition to any gardening toolkit.