ASSEMBLY
1 BAGGER SUPPORT ASSEMBLY
1.Align support assembly pin with hole in drawbar and hang assembly over the shoulder bolts.
2.Be sure support assembly is seated properly and secure with retainer spring supplied.
SHOULDER
BOLTS
2 | MOUNTING COVER ASSEMBLY TO |
SUPPORT ASSEMBLY (See Fig. 2) |
NOTE: For ease of assembly, you may wish to obtain the assistance of another person for mounting cover assembly to tractor.
1.Position cover assembly on ground behind tractor.
2.Lift and rotate cover to align cover brackets with support assembly tubes.
3.Slide cover assembly down onto the support tubes.
SUPPORT
ASSEMBLY
3064
PIN
RETAINER
SPRING
FIG. 1
COVER ASSEMBLY
SUPPORT |
ASSEMBLY |
03024 |
FIG. 2
5
