FUEL SYSTEM (DFI) 3-63

DFI Power Source

Main Fuse Inspection

Refer to the Electrical System chapter for the ECU Fuse Inspection.

Relay Assembly Removal

CAUTION

Never drop the relay, especially on a hard surface.

Such a shock to the relay can damage it.

Remove:

Seats (see Frame chapter)

Bolt [A]

Relay Assembly [B]

Connector [C] (disconnect)

Band [D] (Cut)

Relay Assembly Inspection

Remove the relay assembly.

Connect the hand tester [A] and one 12 V battery [B] to the relay connector [C] as shown.

Special Tool - Hand Tester: 57001-1394

Main Relay

Relay Coil Terminals [3] and [4]

Relay Switch Terminals [1] and [2]

Testing Relay

 

Tester range:

1 Ω range

Criteria:

When battery is connected → 0 Ω

 

When battery is disconnected → ∞ Ω

If the relay does not work as specified, replace the relay assembly.

Page 117
Image 117
Kawasaki STX-15F DFI Power Source, Main Fuse Inspection, Relay Assembly Removal, Relay Assembly Inspection, Main Relay