Kawasaki STX-15F Stabilizer Removal, Stabilizer Installation, Reboarding Step Removal

13-14 HULL/ENGINE HOOD

Fittings

Stabilizer Removal

•Unscrew[B]. the stabilizer bolts [A] and remove the stabilizer

Stabilizer Installation

•Install the stabilizer as shown. Stabilizer [A]

Chine Line [B]

111 ±3 mm (4.37 ±0.12 in.) [C]

8 ±2 mm (0.31 ±0.08 in.) [D]

•Apply a non-permanent locking agent to the stabilizer bolt and torque them.

Torque - Stabilizer Bolts: 9.8 N·m (1.0 kgf·m, 87 in·lb)

Reboarding Step Removal

•Unscrew the reboarding step bolts [A] and remove the reboarding step [B].

Reboarding Step Installation

•Apply a non-permanent locking agent to the reboarding step bolts and tighten them securely.