FUEL SYSTEM (DFI) 3-77

Inlet Manifold

Replace the injector seals [A] with new ones.

Apply grease to the inside and outside of seals.

Tighten the delivery pipe mounting bolts [B].

Torque - Delivery Pipe Mounting Bolts: 7.8 N·m (0.80 kgf·m, 69 in·lb)

Route the cable, wire and hose correctly (see Cable, Wire and Hose Routing in Appendix chapter).

For JT1500-A2 model ; Replace the double spring clamps with new ones. (see Fuel System Diagram)

Page 131
Image 131
Kawasaki STX-15F service manual Fuel System DFI